Flipper Knife
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a folding knife design i have created in OnShape, which flips open and locks. I have designed the knife with a…
- Rating
- 4.333 / 5
- Likes
- 147
- Downloads
- 602
- Makes
- 4
- Views
- 5,583
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This is a folding knife design i have created in OnShape, which flips open and locks.
I have designed the knife with a 0.02 - 0.03 tolerance depending on the spot. if the tolerances are a bit too tight you can just sand down the pins with sandpaper, or scale the model slightly up.
I highly encourage you if you decide to print it out, to post your result when its done. and if you see something i can improve on please post a comment :)
I have added a thicker lockbar (and a handle with a bit deeper groove for the new lockbar) and the option for inserts so that you can add another color in the handle.
Additional Info
Here is how i would recommend you have the parts rotated when printing for the best finished result.
The lockbar is supposed to be superglued in.
Category: Hand Tools