Align Trex 550 / 600 - Direct drive tail motor mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert the traditional tail of the trex 550 or 600 to a direct drive tail motor.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 12
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.
Dimensions:
- 19mm bolt pattern diagonally
Hardware:
- 1x M3 insert
- 4x M3 bolts for motor mount
- 3x M3 bolts for attachment of bracket
Support my work: All of my models are available for free. If you'd like to show your appreciation, consider Buying Me A Coffee.
Filament: PLA or PETG
My setup: I’m planning to run it with ArduPilot. The tail motor is a Hobbywing 3110 900KV paired with a 10" triblade prop and a separate 70A ESC. None of this has been tested yet, so I’m not sure if it’s the perfect setup