Counting matching models…
This print consists of the base and 3 thumb screws for leveling adjustment. The base can be printed as a single color, or with 2 colors for MMU2S users. Import the base STL into PrusaSlicer and choose ‘Split to Parts’ to see the alignment…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
This model is a remix of my previous bullseye spirit level stand that used an alignment stick. Now to get the path tight, we will use a laser! This print consists of the base and 3 thumb screws for leveling adjustment. A Ryobi Laser Cube…
Print approx. €1.37–€1.68 excl. taxPreliminary estimate for PETGSource material: PET
Print instructions: I printed all the tools in PLA and they're holding up perfectly fine. The ideal thickness of the caliper alignment tool is 0.35mm. So set your first layer to 0.2mm and print with a layer height of 0.15mm. I printed…
Print approx. €0.19–€0.23 excl. taxPreliminary estimate for one variant
Würth Abrasive Disc Holder and Alignment Aid Introducing the Würth Abrasive Disc Holder and Alignment Aid – for a better (looking) work flow! Storing all your abrasives neatly and easily accessible has never been easier. Grab the right…
Print approx. €2.07–€2.53 excl. taxPreliminary estimate for PETGSource material: PET
This tool is designed for TTS-55 Laser engraver whith 40x40 mm head. Is universal for many other laser engravers and works best with Honeycomb base where you can fix the tool into position. This reduces preparation time and makes your…
Print approx. €0.47–€0.58 excl. taxPreliminary estimate for one variant
I needed a clutch alignment tool for my Land Rover Series 2A. I found plenty of others out there but nothing for the Green Oval so I designed my own.
Print approx. €2.35–€2.87 excl. taxPreliminary estimate for one variant
Alignment cones to make sure your scope is properly aligned Print instructions Infil is 0% but you can change as needed Cones are 6cm tall but can be modified as needed
Print approx. €1.34–€1.64 excl. taxPreliminary estimate for one variant
I took the xtool honeycomb riser by cbabbman and increased the thickness and size so that it would have a better hold on the honeycomb panel and also slightly increased the gap between the honeycomb and the stainless plate and increased…
Print approx. €8.42–€10.29 excl. taxPreliminary estimate for one variant
Work in progress. Based on this redditors design: https://www.reddit.com/r/golf/s/S9aR5hANGf Just an arrow with the tip cut out to align with your golf ball when on the green. Simply place your ball marker, pick up your ball and continue…
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for PETGSource material: PET
This model uses taper pins and a miter track to align your miter gauge precisely. Many times the stock miter gauge is off and then you are stuck using a square and some guesswork to make sure the fence on your miter gauge is aligned with…
Print approx. €0.18–€0.22 excl. taxPreliminary estimate for one variant
Remix of 4x Tweezers holder to mount on a IKEA Skådis Pegboard, remixed with better parameters to make it fit easy.
Print approx. €1.78–€2.17 excl. taxPreliminary estimate for one variant
A tool to help align two halves of a split quad after cleaning
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for one variant
This is the first thing I have made and printed myself. It is intended to be used to align the transmit/receive antenna on a RF network link about 100m apart. I needed something to mount a laser pointer onto the antenna at 90 degrees to…
Print approx. €1.73–€2.12 excl. taxPreliminary estimate for one variant
2+24-04-25 Obsolete? The new 6.0.0 firmware has improved its nozzle alignment so much that I can no longer detect any deviation from Perfect: https://github.com/prusa3d/Prusa-Firmware-Buddy/issues/3797#issuecomment-2063990752 ***…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
This is a clip-on cover for the cable connector that goes to the bed of the Kobra 2 Pro . It should also work on the original Kobra 2 and the Kobra 2 Neo . The cover is meant to act as a bed aligner. It is also easy to put on and remove…
Description: Creality K1 XY axes alignment tool. Update: Added alignment tools for K1 Max. It will help keeping the axes perpendicular while adjusting the belts. Also it will keep the X gantry at 150mm from front pulleys so you can adjust…
Simple alignment test, single layer 0.25 mm, 0.4 mm extrusion width. 190x190 mm. Solidworks source file included Category: 3D Printing Tests
There are 2 versions: The regular, if you love simple things. The clip, more useful in vertical configuration, especially if you need it to stay fixed without holding it with your hands. Every stl contains both versions in order to limit…
I created an easy alignement tool for the back leadscrew of the Prusa Core One. After I finished my build of the Core One I tweaked the front leadscrews using the little helper from user @rinkel.…
Tool to align magnetic bed sheets, kinda like the stop pins on the Prusa MK3. Supports decontaminator nozzle brush . Fits Voron 2.4 250, 300, 350. What you need: 4x M3x8 SHCS 4x M3 2020 T-Nuts or M3 2020 Hammer Head T-Nuts (You should…
The most efficient way to correct small imperfections in bed alignment. Recommendations : Print on ABS Versions : height of 0.20 height of 0.30 height of 0.40 adjust the height yourself.
I tried the original design several times, but it kept breaking on my during install. The tabs would snap off or it would split at the layer lines. I probably could've scaled it very slightly to work, but I wanted to give this a shot…
Simple alignment tool to install MGN12 rails on 2040/4040 extrusions. Printed myself with PETG-CF , because I was lazy to change filament, but all other filaments should be fine. .STEP-file included, if you want to edit the model. If you…
Version(s) V1.0 - 21Nov24 - Initial Design ---- Description It helps keep monitors nice and aligned. Also, you can gift to colleges who are lunatics with monitors at various angles to each other :) Use a bit of 3M tape to attach to…
Edit 17.1.2023: Added optimized model with longer base and some extrusions to fit into the frame so it is more stable and easier to use. This is simple alignment tool that you preferably need when upgrading to dual Z axis to…
IMPORTANT : as I don't have an original Kobra, this was not yet tested. If you print it and it works, please post a make and a comment so I know if It works, if I need to improve something or take the model down. ------- UPDATE : based on…
Support me: Post a Make and Comment PayPal Venmo: @paulorfo Cash App: $paulorfo ------------------------------------------- This tool is designed to assist with the proper alignment of the Belt Tension Tool used in 3D printers. It ensures…
With the use of a cheap digital tyre depth tread indicator, you can easily build a jig that will measure your tablesaw blade's runout to two decimal places of (insert your favourite unit of measure.) I'm not sure whether I have the skills…
Print with PETG at 100% infill should take about 30 minutes. please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway. https://ko-fi.com/3deeznutz Check out my other designs.…
These are just simple blocks you can shove behind your Z axis motors on the bottom side to true up the angle with the metal uprights. See photos for what I'm talking about. I noticed mine were greater than 90 degrees and this seems to…
QUICK ALIGNMENT STOP TO LOCATE THE MAGNETIC BUILD PLATE FOR THE ELEGOO NEPTUNE 3 PRO. REPLACES BACK RIGHT BED SPACER. MUST RUN AUTO BED LEVELING AFTER INSTAL NO SUPPORTS NEEDED. PRINTS FAST MAY HAVE TO SCALE =/- DEPENDING ON YOUR ADHD/OCD…
This will center your Shimano 105 / Ultegra and Durace 11 / 12 spd calipers perfectly to the rotor. Slides in from the top once pads are removed, make sure you have pushed in your pistons first (this is also a good time to lube and check…
Clutch alignment tool for BMW fine spline clutches. Spline is 32,5 x 35 - 26N this tool is compatible with clutches for gearbox: GS6-53 D Z - Diesel GS6-53 B Z - Benzin/Gasoline GS6-37 D Z - Diesel GS6-37 B Z - Benzin/Gasoline These…
Quickly align your stem and handlebars with the front tire in a accurate-ish way. Place it on the handlebars, get it roughly centered, and use the top groove as a “sight” to center it on the front tire. I saw the original on the Berm Peak…
Tool to quickly and accurately align the table saw top to the blade and fence to improve the quality of cuts and operation of the saw. Miter bar fits the standard ¾" miter slot common on cabinet style table saws. Should work fine with…
Aligning your stem can be difficult! There are a couple stem alignment tools on the market, but are generally expensive. This tool will work great to achieve a no-worry alignment. I used a .16mm layer height without any buildplate…
This is a pair of "legs" that will hold the x-gantry perfectly level while you adjust it. This video from Alex Kenis will show how it can be used instead of the CD cases he uses. You don't need it, but I used the knob, an m3 bolt and…
Hello XL printers, I was one of the first to receive a Prusa XL Multitool printer. From the start, I had problems tightening the belt equally on both sides and still aligned parallel so that there is no gap on either side. Since I've…
This is untested, but should fit the following models: Audi B5 A4 FWD 1.8T Audi B5 A4 Quattro 1.8T Audi B5 S4 All 2.7T Audi B6 A4 FWD 1.8T Audi B6 A4 Quattro 1.8T Audi B7 A4 FWD 2.0T Audi B7 A4 Quattro 2.0T Audi C5 A6 Quattro 2.7T Audi C5…
Mounting bracket for Creality Falcon 2 40W. Allows you to add a red light laser to the Falcon 2 2 40W to allow easier alignment. No addition screws or tape required to fit. It should be a nice secure push fit to the top of the laser…
Turntable Pickup/Cartridge Alignment Tool: clamp it on your cartridge and align it with a free cartridge alignment protractor! You can download a gauge for free and without creating an account e.g. on:…
This is the second iteration of my Voron Trident Y Axis 110mm Alignment Guide/Jig Faster print Easy to assemble Less filament consumption
A 3ml vial labeling jig. updates: 2/17/26 - Alignment slider is still a little more loose than I'd like, and hash marks could use a little better definition. Updates should come pretty quick, plans from 10ml vial in the near future as…
The narrow one is from a random Discord which i dont find anymore (thanks Discord Search) the wide one i made in tinkercad. Based on your printers accuracy you might want to print +/- 1 % (mine is spot on). Also take a knife around the…
Use this tool to easily align your solar panels with the sun. First find true south (northern hemisphere), or true north (southern hemisphere). Face the panels for your respective direction. Use some double sided tape to temporarily mount…
I, as well as other N4/4Pro users, had trouble getting a satisfactory fitment with the original design by @bazzzzzzz_230758. I referenced the original's geometry while building my own model in Fusion based off of the measurements of my…
Manual Chain Aligner, fix the clamp on the rear sprocket and use the rod to observe if the chain is correctly aligned. All you need is 1pc M8 screw and 1pc M6 screw and a rod - I used 3mm aluminum wire. The M6 and M8 threads are…
A tool designed for Alignment of model S door handles. Part numbers for teslas original tools: 1080985-00-A, 1080985-01-A, 1080985-10-A
a simple tool to help align the magnatic sheet of the Kobra Neo bed. it should work on other models with same bed dimention and structure. If the washers hight under your bed is smaller than the model, you can simply cut the model from…
These applicators help you quickly align sanding disks perfectly with the holes in the base of the sander. These are designed for the Festool ETS-150 and both the delta and the disk pad for the Rotex 90. See the video here
Tool designed, for precise alignment front wheel with respect to the handlebar. Got the idea from some commercial tools available on the market. The laser angle is adjustable to compensate different models of stem. Before use check the…
Edit: Added a step file thats a magnetic version of the tool, so no bolts needed, just some 8mm magnets. They are a tight fit, so i recommend a dab of super glue and some flat pliers to press them into place. This is a printable version…
I designed this alignment tool for my Anycubic Kobra 3. this tool will help to adjust the excentric bearings of z you need to print two an place them on the x axis and manualy move the z axis all the way down, adjust the excentrics and…
Made to fit on bars from toddler bikes to 35mm, and those with wider stem mount spacing.
This is a reverse alignment tool for Co2 laser machines from Omtech. I upload this upon request, but I really encourage that if you can afford to, that you purchase the “real” tool from American Photonics, it even comes calibrated! Please…
I liked that STprintings PTFE button made it easy to remove the PTFE tube but the infeed alignment by Ryk helped the AMS feeding issue I was having so I combined them. is model helps align the PTFE but incorporates the ability to easily…
Laser beam alignment tool for the Chinese K40 40W CO2 Laser. The tool has two parts, one for mounting on the mirror and one for mounting on the laser head. Using tape or paper to mark positions has the problem of smoke residues getting on…
Do you love Gridfinity? Do you love magnets? Do you hate installing magnets into your Gridfinity bins? Well, you aren't alone. I've always found it to be a particularly fiddly process to make sure you have the right polarity and to keep…
The front cover alignment tool from the LS essentials pack didnt work for me as it was too large in OD so I designed and printed my own to suit my LS1 from a Holden VY SS Commodore. I added a radius to one end to help with insertion onto…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is a…
Often outlet boxes are installed crooked, as are the holes that are cut into wall materials to accommodate an electrical box. This makes it a little difficult to install the outlet or switch nicely perpendicular to the floor. This is an…
This should help to align the PEI sheet with the printbed.
This tool will make it easier for you to align your Z axis stepper motor by easily seeing the movement in the lead screw end. Aligning your Z stepper is good for longevity of the parts, good for quality of the prints and is crucial if you…
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
Alignment tool for MGN9 Linear Rails towards 4040 Aluminium Extrusions
EDIT: UPGRADED MODEL: https://www.printables.com/model/478752-parametric-linear-rail-alignment-tool-mgn7-mgn15 Very easy and fast print to get your rail perfectly aligned with the aluminum profile. There are 2 versions: the simple one,…
Small jig / tool for aligning a screen protector when puttin it on the R36S. Designed for the screen protector shipped with the R36S (76mm x 59mm). May not fit other screen protectors. May fit other consoles, e.g. R35S, but don't have one…
Hello, i have greated a alignment tool for Shimano SPD Cleats. Its created in two different sections, you can print it also on small print plates. If you have some improvments for this feel free to contact me.
An alignment plate for putting practice & training to hone your skills on the greens of the golf course while safely at home or practice green. Simply place the mat and secure with a couple of tees (flush fit into the middle and rear…
BOM: Printed with ROSA3D Starter PLA Red Complete your 3D-printed woodworking and cabinet assembly toolkit! Alongside our L-corner and T-joint jigs, this straight alignment jig is the perfect tool for connecting two standard 18mm boards…
This tool slides in the disk brake caliper and over the brake disk to align the caliper correctly. You can then tighten the screws, insert the pads and if the pistons move freely and evenly, everything should end up nicely aligned. The…
Mounting bracket for Creality Falcon 2 40W. Allows you to add a red light laser to the Falcon 2 2 40W to allow easier alignment. No addition screws or tape required to fit. It should be a nice secure push fit to the top of the laser…
UPDATE 2024-04-25: I uploaded a new version that has more surface area for gripping the tool, and the safety shield/wings on both sides now cover a wider area, reducing the chance of contact with live wires. NOTE 2024-04-08: I just…
These hold-down pins are a simple solution to a common problem: keeping your materials secure and perfectly aligned on your Creality laser cutter’s honeycomb bed. They're designed to fit snugly within the honeycomb cells, providing a…
Used to align and reinstall oil cooler on Porsche 944 with early OPRV. Warning: This tool has NOT been tested yet. Use it on your own risk. The tool is based on rough measurements found on Rennlist forums. Should fit though. Made this as…
I did a full suspension overhaul on my project car and needed to get the alignment somewhat close before driving it to the shop. Off the shelf options for toe angle plates cost upwards of $100, so I sketched up my own. Fairly large print,…
Linear rail alignment clips for 2020 V slot and T slot extrusion. Designed to be peg-like for great grip and ease of installation and removal. I designed these to assist in a few personal printer builds in the future. The MGN9 clip is…
Print Settings Printer: Creality S1 Rafts: No Supports: No Resolution: 0,20 Infill: 100 Filament: ABS, PLA or PETG Category : Tools Made With Blender 4.1
Struggling with aligning the build plates on your 3D printers? I faced the same issue and designed these alignment tools to easily position the magnetic plate of my printer during reinstallation. These aligners are printed with PETG,…
the tool comes in three variants: normal, looser and tighter. i've printed and applied my screen protector with the looser variant, and it came out a little crooked, and that's why i've made three variants. i'd advise you to print the…
I wanna something to align the linear rails so I made this and I hope this can help someone. I made one and just move it and tighten nearby screw but you could make 2 of them and just put them one each side while you tighten screws.
This tool simplifies the in-place alignment of the servo horns (Brand: SAB) used, for example, on SAB Helicopters (Goblin, Kraken, Genesis, etc.). When used in connection with a small bubble level (e.g. 10x10x29 from amazon…
I made a dongle to align a UniFi Building Bridge antenna using a commercial, off the shelf laser pointer. I used a cheap one from Amazon (< $10) and it worked great, but you could probably use almost any standard laser pointer. The one I…
Place one on each side of your gantry to help with horizontal alignment
I bought a bed plate and it didn't lineup with the screws on the K1 Max (even though it said it would). I wasn't the best at cutting it to fit. So I made this, with the idea coming from similar things I've seen in the past. I am still…
Print two and place on either side of the gantry to hold it level while you fix the gantry in place. use to check if the gantry has shifted or to hold the gantry while you work on the printhead. When using place the tools on either side…
This is a simple holder for a mini 6mm laser diode module that fits into the tube of a K40/equivalent CO2 laser engraver/cutter. There are channels on the side for the laser module wires to exit the tube to connect to a battery. There is…
After searching through countless over-engineered heat insert presses, I created this minimal design that achieves perfect alignment with minimal parts and assembly time. Materials Needed Printed parts (included in files) M3 screws and…
Attach an MGN7 rail to a 2020 extrusion. Available in three different lengths, mix and match to meet your requirements. Hard to do right, as the rail is only just wider than the slot (and so does not sit on a flat surface by default). For…
A little tool to help align labels and stickers when applying them. Align the sticker against the raised lip, and transfer to the tool. Then transfer on your product. Prints fine without supports, and on fast settings. You can also align…
Small tool to align and install your Beacon 3D prob. Move your toolhead all the way down, till it touches the print bed. Line up the tool under your Beacon prob. Push your air duct with Beacon or Beacon mount lightly onto the tool.…
Alignment tool to install MGN12 rails on the front of the ZeroG Mercury One.1 enclosure. More details about Nebula open beta can be found on the ZeroG discord - https://discord.gg/zerog If you have an Ender 5 Pro/Plus then you really owe…
Designed an alignment job for my Creality Falcon2 laser cutter. Provides about ~6mm (¼") offset from the plastic to where the laser actually hits (laser + PLA/PETG) = BAD. Includes posts to ensure minimal movement during alignment.…
Parametric spool alignment disk for the Filament Spool Switcher & Winder for Bambu Lab AMS
Jeep 3.7L Manual Transmission Clutch Alignment tool with 10 splines. ABS filament 4 Perimeters (vertical shells) 30% infill no supports required
It clamps your monitors together. If you want your multi-monitor setup to be aligned and pulled together with no gaps. So there does look like a scary amount of files but that's just because I tried to cater for most common types and…
Aligning the laser cutter is a process, but it just got a whole lot easier! This device is a cap for the end of the laser tube that contains a visible red laser diode that will make alignment a lot easier! Print instructions Steps to use:…
This is a dual-sided 3D printed tool designed to assist in the precise positioning of Crankbrothers cleats on cycling shoes. This model is dedicated to the right and left cleat, making the alignment process faster and more accurate. The…
I wanted to check the alignment/collimation on my Svbony SV121 Laser Collimator, but other existing tools didn't work as it has 2 different diameters to the front an rear of the housing so I designed my own alignment jig for it. Uses 4 x…
NOTE: bushings are slightly longer than factory bushings. This is to allow for compression while torquing 1999-2007 Toyota Tundra 2” Lift Rear Skid plate alignment bushing. Should also fit 1995-2004 Tacoma and 2000-2007 Sequoia 4WD. I…
