Counting matching models…
Servo holder for Align TREX 700N Helicopters, as i could not find these online i decided to design and print my own, so for anyone else having the same trouble, please help yourself. Print Settings Rafts: No Supports: Yes Resolution: 200…
I needed to add a new Trex Post to my deck but the Trex Bases available did not match my current bases. My posts were also slightly taller which meant I needd an extension for the post. I designed and 3D printed both parts in white PETG.…
3D model description I was fed up with having to take my GPS out of my bag or pockets at every consultation. This clip allows you to quickly attach a Garmin Etrex GPS (models 10x, 20x and 30x, I haven't tested the others) to your belt or…
This is a model of the drive shaft gear for the Industrix M37 Plus machine. The first section is for receiving film. We use this machine for developing X-ray images, and we've encountered a problem where the gear constantly breaks down.…
As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam…
My cover has broken after many years. I designed this to replace the old cover and it works like a charm. Unscrew the 4 screws in the cover (T5) and remove the front. Unscrew the two Phillips 000 screws and remove the printboard. Remove…
I made a nice Strex Holder for my Crivit Urban X 3.0 Electric Bike Because my Wahoo Elemnt broke, I got a simple Strex bike computer and made a new bike mount for it. Print this like the screenshot from the slicer for minimal support. The…
Made in Solidworks. Please dont question some approaches :D
This is the plastics for the CYD version of my AAC communication device version 3.0 It has a common software base and runs on several embedded processors with a lot of screen options and input options. I recently found a CYD kit and…
I have created this Align Trex 450 anti-rotation platform with integrated Matek G474-Heli case (Rotorflight). Let me know if you have any suggestions to improve my design or have any questions, let me know in the comments. Thanks :)…
Needed some feet for my old Altrex aluminium ladder. The old rubber feet where long gone. I printed mine in PLA with 5 perimeters. Be aware! Depending on the surface the ladder is placed on, plastic feet may be very slippery! Print with…
The Flexi-Trex by Benchy4Life is awesome. Now this saddle lets your Lego figures ride on their own Flexi-Trex. Print Settings Prusa Mk2 Rafts: No Supports: Yes, if printing the whole saddle at once Resolution: 0.1 Infill: 20% Notes: I…
Trex not based on any specific version. He has some battle scars over his body. There is an obj and stl
When you're sitting in a kayak with a paddle in hand, the most convenient place to attach the navigator is to your own leg. That’s exactly what this model is designed for. Print it using ABS or PETG (preferably for better UV resistance),…
I wanted to have a way to carry my Garmin eTrex SE without having to keep the batteries in it and to protect the screen. This simple print keeps it secure and has the batteries stored alongside. I've printed it in PETG to make it a little…
can be used to install 20mm generic straps for Amazefit Trex watch
DEUTSCH/GERMAN Da es in der dunklen Jahreszeit gefährlich ist, unbeleuchtet spazieren zu Gehen, habe ich mir kurz Gedanken gemacht und diese Halterungen für die gitterartigen Protektoren, in unserem Fall Sportrex 2, entworfen. Verwendet…
I bought a Trex Enhance railing kit, which is a nice composite railing system, but is designed to mount to a 4x4 wooden post. I was mounting it to a 1.5 inch metal post, and the included brackets would not work. So I designed these…
Here comes a special Easter edition of the beloved 🦖 T-Rex! I’ve given him an egg to hold, available in 3 variations: a classic 🥚, one with a ❤ heart cutout, and one with a 🐰 bunny cutout. This cute model makes a fantastic Easter…
Replacement keypad cover or a Xantrex Prosine 3000 watt inverter charger. Off the shelf replacement keypad : https://www.amazon.ca/dp/B0719PLRY3?ref=ppx_yo2ov_dt_b_fed_asin_title 1x4 4 Key Matrix Membrane Switch Keypad Keyboard…
Universal Garmin Navi Halter besonders für Etrex 30 und kompatible Modelle. Die Befestigung erfolgt mit einem Velcroband - passt also auf alle Fahrradlenker.
Printable case to built a Vectex Controller Plug. Needs a 9 Pin D-SUB female connector (Conrad part number 1401502 - 62 | Digi-Key part number 732-618009221923-ND) and a anti-kink sleeve for 4mm cables (Mounting hole is 6mm x 4.5mm, 2.8mm…
Case for homebrew Vectrex cartridges or as a replacement part for damaged original carts. Fits for most original vectrex or new pcbs, like those from retroelectronik.com. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
Additional parts needed VecMulti Multicard (2018 version with SD-slot mounted on separate PCB) 6 wires, approx 30mm length soldering iron de-soldering tool self tapping screw, max 18mm length Post-Printing De-solder the SD-slot PCB from…
Mein Garmin etrex touch ist sehr sensitiv gegenüber Regentropfen auf dem touchscreen. Deshalb habe ich mir eine Abdeckung dafür konstruiert.
This is my dino from trex game from google when you dont have wifi
I’ve created a solid support piece with a slight tilt to counteract the lean caused by the weak center beam. It allows the original Makerbots T-Rex base to sit level and remain stable.
I needed some new feet for my altrex woodytrex loft ladder, however i wasnt willing to spend 34 euro for a bit of plastic They are modeled after the Original and are a direct replacement for the origenal, i printed them without support in…
Kayak mount for a Garmin Etrex Legend GPS receiver. Mine has a serial port, no USB. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: Doesn't Matter Supports: no Resolution: 0.2mm Infill: 15% Filament: Generic ABS black Notes:…
He was homophobic in the 90s but he discover his son was gay and now he is openminded and tries to help the LGTBQ+ community to go further and have impact on Texas or Alabama
Meet T-Rex Jr. , the fabulous son of a once-close-minded dino dad who grew up roaring in the wrong direction. Born in the Cretaceous suburbs of prejudice, this bold little rex came out with pride and shook the prehistoric patriarchy to…
Easy to print, 0.25 mm layer height, 20% infill. The inner diameter is 25 mm, but can be adjusted in the print file. Einfach zu drucken, 0,25 mm Schichthöhe, 20 % Infill. Der Innendurchmesser beträgt 25 mm, lässt sich jedoch in der…
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
This is a simple customization of HAMMER_T's Garmin Mounting Clip to mount my Garmin Etrex 30 on my Canyon mountain bike. I used a small piece of an old air chamber to make it grip on the bike. I printed it in ASA because it can happen…
A data/power connector for the old etrex GPSs. The height of the pogo pins that are required are 6.75 mm. That is from under the flange to the end of the tube section (not including the spring point). Glue is required.
CZ: Tento univerzální držák slouží pro upevnění světel s klasickým upínacím mechanismem pomocí gumičky a také pro upevnění světel/radarů Garmin Varia nebo Bryton Gardia pomocí upevňovací základny (dostupná např. na Aliexpressu). Držák je…
Custom case for use with the Vextreme open source multicart. The design was based on the Vectrex Cartridge Case by CNK, but needed heavy modification to fit the Vextreme board. This case is printable without supports and looks great with…
Got bored and wanted to break in my Centauri Carbon. My print didn't come out too good and I forgot to take pictures before the acrylic amco job I did on it. PETG gave me stringy results and didn't do any post on it. This is my first PETG…
Diseño inspirado en globoflexia! Este pack incluye dos versiones STL del mismo dinosaurio estilizado, ideal para impresoras FDM. 📦 Contenido del pack: 🦕 Versión grande (aprox. 15 cm de alto): ideal como figura decorativa. 🔑 Versión mini:…
3D model description I was fed up with having to take my GPS out of my bag or pockets at every consultation. This clip allows you to quickly attach a Garmin Etrex GPS (models 10x, 20x and 30x, I haven't tested the others) to your belt or…
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance.…
I designed this part to convert the traditional tail rotor setup to a direct-drive tail motor. With a direct drive tail motor the part count is reduced substantially. I hope this will improve reliability and reduce maintenance. The…
Designed to hold the SIYI A8 Gimbal on the Align TB60, however other gimbals can be customized to fit by changing or adapting the bolt pattern. A blank version of the top plate is provided for custom builds. Hardware: 2x M2.5x6 screws…
This is a remix intended to support mounting the bracket using 3mm hardware.
A charming, high-quality 3D mini-figure of a baby T-Rex in a sitting pose. It features a soft green and cream color palette with smooth, rounded aesthetics, designed to look like a collectible vinyl toy or a high-end 3D animation character.
Compact 3D‑printed clip designed for securely attaching a Garmin eTrex GPS to gear, featuring an integrated hole sized for 550 paracord so the device can be tethered or worn for extra safety and convenience Layer hight: 0.2mm Top layers:…
This is a model of the drive shaft gear for the Industrix M37 Plus machine. The first section is for receiving film. We use this machine for developing X-ray images, and we've encountered a problem where the gear constantly breaks down.…
As you’ve probably noticed, the head can be attached, please be cautious when snapping the head on to avoid injury! ℹ Tips for printing: Filament: PLA Supports: No! Layer height: 0.16(0.15)mm or 0.2mm Wall loops: 3 Infill: 15% Seam…
I printed the FlexRex but felt it could use some more sturdy links that are more child proof. The link type plays better to the strengths of 3d printing rather and will hopefully take more force to come apart. I remade the FlexRex from…
Trex Escapes from Original Jurassic Park, made with Makerlab Chroma Canvas. 1st color Black PLA, 2nd color Cyan PLA, and 3rd Color Jade White PLA. Best printed with 0.16mm initial layer and 0.08mm layer height.
Baby Trex keychain ornament Baby T-rex design will have two STL files one for keychain and the second one just as a decoration I hope you will enjoy it If you enjoy my content by me a coffee. Thank you for support beforehand :)…
My cover has broken after many years. I designed this to replace the old cover and it works like a charm. Unscrew the 4 screws in the cover (T5) and remove the front. Unscrew the two Phillips 000 screws and remove the printboard. Remove…
I made a nice Strex Holder for my Crivit Urban X 3.0 Electric Bike Because my Wahoo Elemnt broke, I got a simple Strex bike computer and made a new bike mount for it. Print this like the screenshot from the slicer for minimal support. The…
Made in Solidworks. Please dont question some approaches :D
This is the plastics for the CYD version of my AAC communication device version 3.0 It has a common software base and runs on several embedded processors with a lot of screen options and input options. I recently found a CYD kit and…
My first GPS was a Garmin Etrex Legend ('Little Blue') many many years ago, used for geocaching. I always loved that device and this is a bit of a homage to it, and intended as a cache trade item now. The compass area in the middle is…
Ein Verkauf ist strengstens untersagt! Leider muss ich sehen, dass mein Design oft geklaut oder kopiert wird. Ich habe viel Arbeit hier investiert und erwarte, dass die Lizenzregeln eingehalten werden! A sale is strictly prohibited!…
For the new profile Trex boards (and possibly others) this template helps you mark for the correct screw or pre-drill location I used PETG since this is going to be left in the hot sun and I don't want it to warp Also included are some…
A simple 73 mm tall model of the classic pixel T-Rex from the offline browser game. Prints quickly, requires no supports, and makes a fun little desk companion or test print. If you want me to upload something similar or want mods let me…
Simple 73 mm tall model set of the classic pixel T-Rex game from the offline browser game. Prints quickly, requires no supports, and makes a fun little desk companion or test print. If you want me to upload something similar or want mods…
This design is based on the Sharkz model ( https://www.thingiverse.com/thing:910216 ). But my girlfired wanted a TRex too, so we made one together :D Hope you like it as well! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
This is a simplified Vectrex Stick Retainer - the part that goes between the box and metal casing and holds the shaft in place. My Vectrex stick had a lot of play in the z axis, so wanted a part with a deeper well which would hold the…
Called the tRex tap because its designed for my two young children (big monsters with little arms... like tRex!)
I needed a rack for my Vectrex carts as they were all in a box loose.. they fit very snugly could easily be mounted on a wall if needed. Category: Toy & Game Accessories
Modular (bicycle) mount for older Garmin eTrex GPS receivers (and everything else you want to attach). Basically this is my design idea for a mounting system that I've specialized for my old Garmin eTrex Legend HCx. The goal was a modular…
TrexD MOD - Módulo para extrusión directa Ender 5 Plus (BMG/V6/Volcano) Ventajas: Respeta las medidas del módulo original No hay que desplazar el BLTouch No hay que modificar dimensiones de la superficie de impresión Fácil de imprimir…
After the original pushrod holder broke i designed a new one and added two of them to the Heli so it can reduce the vibration in the pushrod. Print Settings Printer: ANET A8 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament:…
I took the design from "Daniel3Dprinter" ( https://www.thingiverse.com/thing:3750456 ) and spilt it into two parts for easy printing. Category: R/C Vehicles
A weighted, non-slip, non-wobble soldering third hand. Huge thanks to Modular Hose for giving me the Loc-Line samples I used to make this! Why is it called TRex? It's got really short arms … Despite what Thingiverse might say, this is not…
Trex Rail Support Bracket (RSB) and Universal Rail Gasket I’ve have had success printing with Sainsmart TPU. Stiff but not too pliable. I don’t suggest using PLA as it won’t weather well. If you try with PETG or another material let me…
This is a basic filter for the drain pipe in a Quintrex boat live bait tank. Created to stop large objects blocking the pipe and the tank overflowing into the boat. The outlet pipe is 25mm (outside diameter) and is pushed into the outlet…
mounts on a picatinny rail. you will need to glue / melt the jaw to the skull. i used a 3d pen and a soldering iron.
I designed the Vectrex cartridge holder to fit all the different sizes I could measure.
Robust handlebar mount for Garmin Etrex devices on a Canyon roadbike handlebar.
Remix to suit my tastes (without the top holes) of JDO's excellent work. This tile accepts the different inserts designed by JDO solutions. JDO has done an excellent job, I recommend that you take a look at it. Printed with 0.6mm nozzle…
Specifically for use in the DeepCool Matrexx 50. Use two case screws to attach the bracket through the SSD drive holes location as shown in the pictures. Its a good case for the money, but the screw holes strip out easily, and the back…
UPDATE 22/12/26: added more material to latch to increase strength (garmin_mount_221226.STL). holes for M3 nut and screw (screw lenght 30-35mm) no supports in holes use Mesh Tools to split model and position like on picture Category:…
