1 / 5
Vectrex VecMulti Cartridge Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modified version of my Vectrex cartridge case to fit a VecMulti card.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 65
- Makes
- 1
- Views
- 512
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Additional parts needed
- VecMulti Multicard (2018 version with SD-slot mounted on separate PCB)
- 6 wires, approx 30mm length
- soldering iron
- de-soldering tool
- self tapping screw, max 18mm length
Post-Printing
- De-solder the SD-slot PCB from the main PCB, completely removing the pin headers used to mount it.
- Re-mound the SD-slot PCB underneath the main VecMulti PCB using six wires of approx. 30mm length. This allows the SD Slot to fit in a standard size Vectrex cartridge.
- Slide the SD-slot PCB in the holder integrated in the bottom shell of the case. The top side will hold it firmly in place once the cartridge will be closed.
- Folding the wires, place the main VecMulti PCB into its mounting position.
- If the top shell with holes (to see the VecMulti LED) was printed, hot glue can be applied as a light guide. Apply from the inside of the shell to the holes, don't apply too much, or the PLA can melt!
- Place the top shell and close the cartridge. Use a screw of maximum 18mm length and pre-drill the holes to fit different diameters. The case should snap-fit even without a screw.
Notes:
Parts are optimized to be printed support-less. I used 3 perimeters for additional strength.