1 / 3
Vectrex Controller Plug
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Video Games
- License
- Creative Commons — Attribution
Printable case to built a Vectex Controller Plug.
Needs a 9 Pin D-SUB female connector (Conrad part number 1401502 - 62 | Digi-Key part number 732-618009221923-ND) and a anti-kink sleeve for 4mm cables (Mounting hole is 6mm x 4.5mm, 2.8mm wall thickness, - I used "Knickschutz für 4mm Kabel" from ab-elektroshop)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.1 mm - 0.2 mm
Infill:
20%
Filament:
Prusament PETG Galaxy Black
Post-Printing
- Remove the metal shell from the D-Sub connector
(drilling out the hollow rivets works best) - Shape the plastic inset to match the mounting hole in the printed part
(you need to cut or sand down the two lower edges, see image of parts) - Mount the anti-kink sleeve by pushing it through the side mounting hole
(a screwdriver works wonders here) - Insert the cable, solder the terminals
(and test everything! - ask me how I know) - Glue the terminals into the printed part with some super glue