ACD Direct (ACD-44) Mobile Aircon 150mm Vent/Hose Interface
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 173
- Wydruki
- 0
- Wyświetlenia
- 1836
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and was unable to source a replacement so I've finally got round to designing a replacement.
I've yet to fully print this (20+ hours), but have printed a test part (i.e. the first 11mm) and know it to fit perfectly.
I suggest it's printed in ABS as PLA may sag under the heat from the vent. You probably want a high infill too.
Supports (unfortunately) will be needed, at least for the runner/rail part.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.2
Infill:
30%
Filament:
N/A ABS N/A
Notes:
I suggest it's printed in ABS as PLA may sag under the heat from the vent. You probably want a high infill too.
Supports (unfortunately) will be needed, at least for the runner/rail part.Category: Replacement Parts