1 / 5
ACD Direct (ACD-44) Mobile Aircon 150mm Vent/Hose Interface — image 1
1 / 5

ACD Direct (ACD-44) Mobile Aircon 150mm Vent/Hose Interface

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and…

Rating
0 / 5
Likes
11
Downloads
173
Makes
0
Views
1,836
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

I've had this aging (but fully working) Aircon unit in the garage for a while, the interface for the hose split and was unable to source a replacement so I've finally got round to designing a replacement.

I've yet to fully print this (20+ hours), but have printed a test part (i.e. the first 11mm) and know it to fit perfectly.

I suggest it's printed in ABS as PLA may sag under the heat from the vent. You probably want a high infill too.

Supports (unfortunately) will be needed, at least for the runner/rail part.

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

30%


Filament:

N/A ABS N/A

Notes:

I suggest it's printed in ABS as PLA may sag under the heat from the vent. You probably want a high infill too.

Supports (unfortunately) will be needed, at least for the runner/rail part.

Category: Replacement Parts

Tags