grow tent duct flange with light baffle insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a light blocking baffle insert for a additional duct port on my grow tent so i drawed one and printed it
- Ocena
- 0 / 5
- Polubienia
- 39
- Pobrania
- 342
- Wydruki
- 1
- Wyświetlenia
- 2202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello, please make shure to print the duct port first and measure the inside diameter to scale it with your slicer settings!
Its made to fit 150mm hoses / 6 inch duct hoses and clamps
In the original drawing the insert has a clearance of 0.1mm to slide in, thats why i warn to first print the port and then scale the insert according to your personal printer extrusion rate and slicer settings because that can differ much from my settings.
I can slide it in and it stays, no need to glue but you better off give it 0.2-0,4mm and glue it if youre unshure, wont matter that much.
Print insert with a brim to get a mounting support between 2 flanges, i used a 2mm brim accidentally and got actually suprised that it has a use.
Printed with:
- 0.4 Nozzle
- Pla Plus
- 0,3-0,2 Layerheight as you wish
- Full walls
- No Support
- Filter out tiny gaps && dont fill spaces between, please verify in slicer for yourself
- Check your combing paths to prevent microstrings inside
Possible remixes:
Filter insert
Reduction insert
Update V3:
Optimized Airflow with round corners
Wider screwholes
Added Support holders for tent frame 16mm
Feel free to leave a make or review, short picture upload, done. Thank you very much