Thien Baffle Bin Nozzle (Dewalt DX735)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Thien Baffle Bin Nozzle / 4" Hose Attachment, inspired from this Video: https://youtu.be/h7oWNcIwr7E
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 643
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a Thien Baffle Bin Nozzle / 4" Hose Attachment, inspired from this Video:
https://youtu.be/h7oWNcIwr7E
This 3D print enables you to easily attach a 4" hose to your dust collection system.
It was inspired by the Youtube video link above, and allows my Dewalt DW735 Thickness Planner to push dust and chips using its built in blower, to the dust pin via the 4" hose. The Dust bin has the Thien Baffle in it to minimise material going back up towards the filter. The Filter I used an old car air intake filter (I just did a service on my VW Passat) and used that, and it works perfectly.
It is made out of a Trash/Garbage Bin which has nice thick plastic walls. I removed the centre of the lid and replaced it with ply wood, then cut out the hole for the filter and this 3D printed hose adaptor. The adaptor enables the material to swirl around the inside of the Bin, which then collects at the bottom, and the baffle stops most of the dust coming back up, which keeps the filter clean.
This 3D print I cut the hole for it in the ply, on an angle as its angled (little tricky) but then screwed it in place with the 2 tabs, and then used Hot Glue around the edge to fully seal it up. Was rather simple and is strong.
It works amazingly. Nothing escapes.