144 led strip holder with dividers / baffle RGB RGBW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired from the Voron Switchwire led bar
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Item Description: Our LED strip holder is inspired by the Voron Switchwire 3D printer design, and is designed to hold 20 or 25 LEDs per strip for 12mm or 10mm wide LED strips. The holder features a baffle every 5 LEDs to ensure even light distribution, and is optimized for use with LED strips that have 144 LEDs per meter. The holder is easy to print, and can be mounted in a 3D printer aluminum profile using 2 T nuts.
BOM:
- 3D printed LED strip holder
- 2 M3 screws (6mm or 8mm long)
- 2 T nuts you can use this printed T-Nuts https://www.printables.com/model/235483-m3-t-slot-nut-for-aluminium-extrusion
Please note that using M3 screws that are 10mm long may scratch the aluminum extrusion, so we recommend using screws that are 6mm or 8mm long instead. This will ensure a secure installation without damaging the extrusion.
Recommendations:
- We recommend printing the LED strip holder using ABS rather than PLA, as ABS has a higher heat resistance.
- The print does not require support and is easy to print. However, it's important to ensure that your printer is calibrated correctly and that you check the final dimensions of the printed part to ensure that it matches the intended design.
- The height of the holder may vary depending on the thickness of your specific LED strip, so it's important to double-check the dimensions of your specific LED strip and adjust the height of the holder as needed.
- It's recommended to use the holder with LED strips that have 144 LEDs per meter to achieve the best results.
- The baffle design ensures even light distribution, but it may require a little bit of extra work to ensure that the LEDs are seated correctly in the holder.
- We recommend mounting the holder using 2 M3 screws and 2 T nuts in a 3D printer aluminum profile for a secure and stable installation.