53 modeli
Hi! Due to the gift I received from Bambu in the form of "Remote Controlled 16-color RGBW Puck Lights", I decided to remix my previous "Minecraft Ore" model to attach these LEDs. The lamp has a size of 120 mm x 120 mm x 120 mm. Fits…
A simple box for one Shelly RGBW2 LED strip dimmer module and one 5-wire Wago splicing connector. Mounting holes for 2 screws inside. You need 2 flat-head M3x16 screws for box assembly. Jednoduchá krabička pro jeden stmívací modul Shelly…
This part is a remix from this rial bracket: https://www.thingiverse.com/thing:4435764 I put the clamp in to a box, added Thread Inserts and a strain relief. Printing: PETG (for no special reason) 0.2 mm no supports Parts using Inserts:…
This is my take for a Shelly RGBW2 holder. It is compact as i could do it , leaving space for screws heads. I hope you
These parts mount the Shellies vertically on a DIN rail to save space in width on the rail. The shellies are meant to be slid in from the front and snap into place once fully inserted. The snaplock onto the DIN rail is purposely quite…
This is a 3D Printable model of a Fallout 4 Mini Nuke which has provision for a Bluetooth speaker and RGB lighting in a translucent top that can be used as a nightlight or just as a display piece. Re-Mix Notes The Fallout 4 Mini Nuke…
Adjusted model to fit Shelly RGBW PM Plus since the RGBW2 got discontinued.
Minimal wall mount for the Shelly Plus RGBW PM controller. Should also work for other Shelly controllers that use the same dimensions. Retention clip on terminal side allows for mounting in any orientation. Printing suggestions: Height: ≤…
Simple Shelly rgbw2 holder, glue strip did not hold, so I made this. No supports needed. Category: Tool Holders & Boxes
This model is a remix from thingiverse user boxter. It can hold a Shelly Plus RGBW PM on a 35mm Rail.
My model of RGBW led lamp from PLA
This enclosure is designed to hold: 1x Shelly Plus RGBW PM 1x Wago 221-412 1x Wago 221-413 If you want to use machine screws, you will need (M3 or M4 may work but I didn't check): 8x 6-32 heat set inserts 8x 1" 6-32 screws You could also…
I’ve created a custom remix of my own model, originally based on a design by Thingiverse user boxter. This version is designed to securely hold a Shelly Plus RGBW PM on a 35mm DIN rail. I’m using this model to mount the Shelly in our…
This bracket screws to the factory locations on the front risers to hold an RGBW led strip. I installed a 12v RGBW strip and it is plenty bright enough to illuminate the entire chamber. Powered by a LM2596 and controlled with an ESPCAM…
12mm LED Strip Mounts This is a set of different length 12mm LED Strip mounts used to mount RGBW LED strips. These can be printed without supports with flat side down. The catch has the proper angle to allow printing without the supports.…
This is a remix of RGBW2 Box with a DC coxial power supply adapter and M3 nuts and bolts. In my print there was no need to glue the nuts into the box, the lid holds tight. Printed with PLA (not perfect for the clips, see original model),…
I removed the 2 screw "wings" to make it more versatile in terms of placing. Just use 1 or 2 sheets of double sided tape and place it where you like :) Print it with the opening facing upwards, no supports needed. I didn't use a brim…
This print is a small case to house a Shelly RGBW2 Wi-Fi LED Controller. It includes a cutout for a DC barrel plug jack and holes for thread heat set inserts. See the links below for the items used. I wired the DC jack to the Shelly for…
This 3D print fits four Aputure MC-RGBWW lights. Using clear filament it is possible to utilize as a diffusion panel for larger subjects. A 1/4" 20 thread is also included on the bottom for mounting. Print Settings Printer Brand: Prusa…
The 4" Gimbal Recessed RGBW Downlight This design makes it perfect for tight spaces and low voltage wiring makes it easy to put these in places that might not otherwise be well suited for traditional recessed lighting. Here's what you'll…
Just a simple model to mount a Fibaro RGBW or RGBW2 controller. https://manuals.fibaro.com/rgbw-2/ … with a sort of a cable management Used to mount on wood Fusion360 included So change it to your liking :-)
Item Description: Our LED strip holder is inspired by the Voron Switchwire 3D printer design, and is designed to hold 20 or 25 LEDs per strip for 12mm or 10mm wide LED strips. The holder features a baffle every 5 LEDs to ensure even light…
Shelly RGBW2 Din rail mount
This remix of the Shelly RGBW2 Box is designed to be compatible with the honeycomb storage wall system, allowing for easy attachment and organized storage. The holes have been repositioned to be oriented at the top and bottom, ensuring…
Decorative egg lamp designed specifically for the RGBW puck light LED lamp . The egg acts as a diffuser and creates a soft glow that works well as a night light or Easter decoration. With the remote control you can easily switch between…
Hey, this is a remix of an excellent cover for Shelly. This case is for Shelly RGBW2 with using Meanwell power supply with the R7B connector. Use this socket CONNFLY DS1093-05-BN40S If you would like to support my designs to give me a…
This is an enclosure designed for the Zooz Zen31 or Fibaro RGB Controller 2 (FGRGBW-442). It also supports a female DC barrel connector for power. The DC barrel connector a tight fit, so you'll want to push down firmly on the connector to…
2x2 Grid gridfinity bin for a Aputure MC RGBWW LED Light. Wanted a quick way to access my Aputure lights on a shelf or in a drawer.
Test the difference between CYMK and RGBW using Full Spectrum (color mixing).
Just take apart your Loxone RGBW Dimmer Air and print this box if you want to put in slim space. Print with 0.2 layer and PLA or PETG V0.
Just take apart your Loxone RGBW Dimmer Air and print this box if you want to put in slim space and mount it with some srews. Print with 0.2 layer and PLA or PETG V0.
This Model helps to secure your LED Cables to a surface. Model Dimensions 20x5x10 Hole size: 3,2mm (Diameter) Cabl
Auf dem Bild ist der alte große Deckel zu sehen da ich den neuen noch nicht gedruckt habe. Dieser unterscheidet sich aber nur im Text oben drauf. Das WW wurde in CW geändert. Fusion 360 Links Kleine Version: https://a360.co/2YXOny6 Große…
Halter für eine Shellyschaltung Typ ,,RGBW2".
This built LED tube is powered by an RGBW SK6812 LED-Stripe, controlled by an ESP8266 NodeMCU with WLED software, and equipped with a USB-C charging board for seamless power management. The design features 3D-printed sealings to enhance…
These models are three enclosures designed to accompany a project that uses a Shelly RGBW2 device running ESPHome in order to control an AC Infinity Cloudline S3 fan. Basic box just holds the Shelly and molex plug used by the fan This is…
An updated PSU Cable Lid from the Prusa Enclosure V2 design with an added slot for an RGB/RGBW LED strip ribbon cable. I moved my PSU outside my enclosure so I'm using the original cable hole for my camera instead.
hey i just quickly designed these to fit the strip on the underside of my bed for that nice under glow look i recommend printing in the clearest material you can to let the light shine through
The differences of the remix explain most of it. I needed the model slightly slimmer to fit underneath my cabinets and wanted to power it via USB-C PD so I didn't need a wall wart in my kitchen. Uses heat inserts and 3mm screws (I was out…
This mount fits an 12mm RGBW strip in it, the spacing is 12.5mm. Can be mounted to 2020 extrusion or elsewhere. The normal version is 320mm long and the short version is 220mm long. the holes will fit M3 Hex screws
OpenSCAD Libraries used for generating hexgrid: Hexagonal Grid Generator by James Evans the mnmlMaker BOSL2 by Revar Desmera
old Version - see new Designs! Controller Case for FHEM RGBWW Controllers V2 See also FHEM Forum: https://forum.fhem.de/index.php/topic,69740.msg612566.html V1 Case Holes for Wires and Screw Terminals Wiring Info on Top Click open/close -…
Shelly GU 10 Spotlight Bulb RGBW 230V For use by trained professionals or electricians only!!! Required components: 1x GU 10 socket (Amazon) 1x Shelly Bulb GU 10 Spotlight RGBW 2x Wago terminals 1x cable with plug Shelly GU 10 Spot Lampe…
Nice little tool to hold a flat ledstrip cable. Just screw it in the ceiling, or wall and slide the cable through.
Enclosure for Zooz dimmer to neaten up all the wires, and reduce the fire hazard in my plenum space. I also made an RGBW tape endcap and a dupont crimp terminal cover for this project, linked below. Dupont Crimp Cover…
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
For now it doesnt have a lid to hold down the PSU but I will add it someday. For the pictures I did print the Sun model with very dense brown filament, so it looks very dim. The Shelly controller enables the LED-Strip to change the colou…
A wall plate, so you can mount this remotes. To the wall. With screws. Friction fit. I made this about 5 years ago, so no telling if Feit has changed the dimensions of their remotes. Probably not.
This model features 4 bins for RGBW LED-Diodes.
Designed a conversion part to change the normal timbertech Halogon deck post cap light to RGBW LED tape lights. I have the decklites model DLRRCAPMOD 12 V Halogen Radiance Rail Post Cap Lights. I used the following: FIBARO RGBW Controller…
While making the Moon rocket I wanted to have a box containing the Shelly RGBW2, its cables and the momentary switch.
The differences of the remix explain most of it. I needed the model slightly slimmer to fit underneath my cabinets and wanted to power it via USB-C PD so I didn't need a wall wart in my kitchen. Uses heat inserts and 3mm screws (I was out…
