Hotend 40mm Fan Shroud with baffles (noise reducing)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a model found on Thingiverse, original model not mine, to attempt to improve the noise reduction
- Ocena
- 3 / 5
- Polubienia
- 15
- Pobrania
- 169
- Wydruki
- 2
- Wyświetlenia
- 989
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original model only claimed a -3dB decrease in noise. Edited the model to introduce some scalloping in the main intake barrel.
My original replacement case fan clocked in at a whopping ~70dB at about 2 inches and 60dB at the desk 3 feet away. After printing this initial prototype, it had reduced to 58dB at 2 inches and 46dB at the desk 3 feet away.
v3: Added more pronounced chambering in the main intake barrel and baffles in the output channels. Baffles may be removed after further testing.
I plan on continuing to modify this file and will upload improved versions here.
