Aquarium HOB filter baffle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to drop the water level in my aquarium as low as the hang on back filter (HOB) would allow but that made for…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 89
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution
I wanted to drop the water level in my aquarium as low as the hang on back filter (HOB) would allow but that made for a ton of splashing and bubbles and turbulence so I designed this to handle the drop and let the water gently out the side. It just sits between the plastic rim of the aquarium and the filter. Seems to work ok.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.3mm
Filament: Generic PLA
Notes:
I printed this with a 0.6mm nozzle, but should work fine with a 0.4mm. It's thin so just print with enough walls to make it solid and turn off infill.
Category: Pets