Counting matching models…
This is a library of baffles that can be used with the different generation of Lenovo Tinys with PCIe slots. These are all designs that I have created to fit a bunch of different cards people use with my Fan Shroud and I include for free…
I recently got into feeding the local birds and noticed that the seed was disappearing suspiciously quick… I did not want to spend $50 on a squirrel baffle, so I designed and printed one using a $15 roll of PETG! This model consists of 5…
this powder baffle help with the change in pressure inside the powder tank, keeping a constant pressure over the dispensing hole, increasing the precision of the dispensed quantity.
This piece was made to fit Gravel3170's Squirrel Guard onto a post made from ½" square tubing. Some US big box stores carry shepherd's hook posts made from ½" square tubing. This should be printed from TPU. I used a zip tie to hold it in…
It's a very tight fit, and the SAS card is slightly unaligned but it fits, and it works \_(ツ)_/
Clips on to 1/4" thick baffle, holds 1/4" x 4" x ?" glass or acrylic and optional media tray. Instructions I needed something to clip on to the 1/4" baffles in my 20G high sump that would help reduce micro bubbles in my display tank.…
Use this Flash Gordon strobe light baffle to replace your damaged or lost OEM one. And who's isn't lost or damaged after 40+ years, especially when the original one is made of cardboard? Need to have supports enabled to print the mounting…
WORKS WITH VORSK HI CAPA As i know Vorsk is WE based so should work with WE as well I guess it can be install on other too ID 8mm OD 14mm
This is a remix of another baffle on Thingiverse. The interior dimensions are 4 inches x 1.25 inches.
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
This is a remix of another baffle on Thingiverse. The interior dimensions are 4 inches x 1.25 inches.
Created a end cap baffle for the daylight on a stick. As my voron 2.4 sit's next to me sometimes the LED shining through via the end is slightly annoying. You can see the difference in the image. This print is only the small baffle not…
Drop in replacement to fit a W3-2025SC. The T/S parameters of this driver are similar, but not exactly the same. The t-line should still be within tolerance to function properly, but performance likely changes slightly. My untrained ear…
Replacement Garbage Disposal Baffle. Mine was worn out from 30+ years of use. I keep forgetting when I go to the hardware store. We will see how long this works. Bonus Strainer. Not everything needs to go down there. TinkerCAD link for…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
I don't yet own a Prusa, but it's been brought to my attention that some Prusa printers in the wild are using the Meanwell LRS-350 24v PSU. If you own a Prusa machine that has a LRS-350 power supply, and would like to quiet its cooling…
UPDATE 04142026: This model was requested by another Printables member for his Prusa MK3s Plus. He also suggested I include an unbranded version so those who either prefer not to provide free advertising for manufacturers or would want to…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 60mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
As Mr_Clever_Coyote states in the description of his original design, this reduces, or at the very least, redirects the sound coming from the 60mm fan of many 3D printer PSU's. This part will also improve a 3D printers aesthetics IMO, and…
Print at 25% and use monofilament to secure speaker basket through adapter and around table leg.
This is a simple bracket to mount my housemate's bird feeder (brand unknown) onto a metal pole in our backyard, with a slot to screw in a slinky to keep the squirrels away. Printed in ABS for better UV resistance. Printed in two parts as…
Lenovo Thinkcentre tiny series (m720q, m920q, ...) PCIe baffle to attach a 40mm fan to a connected Nvidia Tesla P4 on the internal PCIe riser. To power the fan i used this temperature based speed controller (…
I specifically wanted something that would block the LED lights from shining up through my smoked acrylic deck panel. For use with the Fizzy's Tech EMS, available here: https://www.printables.com/search/models?q=FT%20EMS
Print it with 0.15mm layer hight and black matte PLA. The notch simplifies installation. This makes it easy to screw in. Use at your own risk.
Print both pieces upside down. PETG or TPU is the preferred material as it flexes around the OTA.
Same model, just added holes for insertion of 6x2 magnets. Printed in PETG with tree supports. Added a bit of epoxy on the top of the magnet to hold it in place, but probably not needed.
Our Whirlpool front load washer had a drum baffle (Whirlpool Part Number WPW10283356) fall off during the course of normal laundry. This model is not an identical replacement, but has worked rather well as a replacement in our washer. I…
Made for Voron Daylight on a stick XXL (mounted on my RatRig V-Core 4 400) BOM for one led stick supports 2 pieces x M3 threaded insert 2 pieces M3x8 (or M3x6) 2 pieces M6x12 2 pieces M6 T-Nut for 3030 Voron Daylight on a stick support…
M920q cover for a 2.5gbe A+E keyed RTL8125B adapter. Probably also fits other Lenovo ThinkCentre variants
The ‘Daylight on a Stick’ (type ‘extra’) sold by https://www.alchemy3d.de has a different distance between the LEDs than the original ‘Daylight on a Stick’. This model is a remix of the baffle from…
This is an adaptation of Eddie the Engineers' LED mounting, which incorporates baffles so that the LEDs are not shinning in your eyes when looking from in front of the printer. Instead of the “bead on a string” approach like the original…
I use 16" Baffle's with my bird feeders. They connect with a "bolt" on" connector that is tightened to a pole. In most cases the included connector is crap and usually cracks the minute you tighten with a screw etc. I designed this…
a low cost way to build a light blocking tube on the 114 hadley telescope 3 rings are included, one with no attachment mechanism, one that simply clips onto an already built hadley, and one that uses the same nut and screw design as the…
Not quite satisfied with the stock 28mm round speaker arrangement from my TCS WOWSound kit, I set out to use my new favorite speaker: the AS01808AO-WP-R easily found on Digi-Key for around $3 per. It has amazing dynamic range and…
Upgraded version. Thicker with reinforcement. First version worked well. This uses more filament but is more resistant to impact and drops. Printed in PLA - 100% infill
3mm, 5mm, 8mm, and 10mm Speaker Baffles for the CRude Engineering 15x11mm Sugar Cube Speakers Speaker for sale on https://crudeeng.com/products/256019636071 Use code PRINTABLES for 25% off your speaker order!
This is a fall-away dew shield for the SeeStar S50, specifically designed for the soon-to-be-released equatorial mode. It includes an sloped shelf, angled for a specific latitude, so you can flip the shield around 180 degrees, mount it on…
This is a low profile bracket/baffle for a Broadcom BCM5719-4P - 4 x 1GbE PCIe NIC (for example the BCM95719A1904G) to be used in a Lenovo ThinkCentre M920q tiny PC. Remove the card's original bracket and use a small-head screw from the…
Realized that my bike was missing this part and the only supplier for reproductions does not ship to my country. I re-made these from pictures of the internet together with measuring my original filter. If someone has the original and…
2020 Extrusion Baffled LED light bar, with an 8mm x 2mm channel for a tape style 8mm COB light strip. Printed in ASA.
Rear baffle plate for a 4-port PCI-E NIC, specifically the fenvi 2.5Gbps Intel I226 RJ45 card (https://www.aliexpress.com/item/1005007669305799.html). Please make sure to print in PETG or another heat-resistant polymer as these NIC cards…
ZWO Seestar S50 baffled light/dew shield for use with 2-inch (M48x0.75) filters. This baffled light/dew shield is an interference fit and slides into place. I've added spring-loaded tangs to help to grip the Seestar. Remember to remove it…
This is a larger baffle for the Hadley Telescope which is attached to all 3 bars. It has a cutout to still support the Hadley Telescope Double Dovetail Finderscope Mount and was remixed to support slotted M4 nuts to attach it to the bars.…
I didn't like the slightly unaligned baffle of darken, so i created my own. The baffle fits a SAS9207-8E HBA and 2,5gbe adapter. I cut the part above the wifiantenna hole to make a better fit. I use the antenna hole to guide the power…
The original model helped, but it will still quite loud, so I added a bowl at the end of the “inlet” tube a few baffles to further reduce volume. It seems to have made a significant difference. The cutaway is for demonstration only. The…
This is a baffle for the water that flows out of the filter that comes with Aqueon Minibow Aquariums. This one was designed for the Minibow 5-gallon aquarium filter, but I believe it will also work for other sizes that use the same water…
I designed this louvre vent cover for a 60mm fan, as I needed one to fit on the underside of a vehicle mounted Starlink pod. Can be used for any opening that fits a 60mm cover. Recommend using some mesh to make it critter proof. Designed…
I made this based on my existing light baffle. Pictured is an old baffle. This 3D print should replace this. This is to block out the light bleed on the close lamps for the jackpot lamps on the right side of the backbox. You will need 2…
I remixed this Light Baffle/Louvre for the circular vents on my grow tents. They allow air to pass, but do not allow light to pass. These work perfectly with ACI tent 6" ports and fit really snug. The screw cap is optional, but helps to…
Commonly people will insert a length of hose into their grow tent air vents and create an S to block light, but this insert will do the same thing acting as a light baffle. This fits very snugly into my AC Infinity Cloudlabs 866 60x60x80…
Baffle for dual port 2.5GBit NIC for Lenovo M920q/M720q, in principle should work for other Lenovo-tiny series PC. Here is a link to the file created in onshape:…
The clamp which holds up the Gtongoko 19 Inch Squirrel Baffle will not fit the 12mm dia shepherd hook sold at Lowes hardware. This part is a simple clamp which attches to the shepherd hook. I designed for M5 hardware. I think a 3/16" x ¾"…
This is an air baffle I designed for a hard drive cooling project I made using an Ikea Lixhult metal cabinet. The base is 120mm x 120mm and the center of the mounting holes are 105mm apart. The radius of the center hole is 56mm. Also,…
I built the very nice Another Filament Dry Box to feed my MMU2S on a Prusa MK3S+. You can view my make . (Note that the make picture was taken while testing, so I did not have all the spool baffles in place yet.) I do not use a buffer…
This is for any portable AC unit's exhaust hose. It fits any 5 inch air hose
A 3d printed newtonian telescope I designed and built as a personal project. Some quick highlights: the unit features baffling down the optical tube assembly can be printed in the volume of a Prusa MK3S or similarly sized printer is…
I'm not sure what's so different about the Disco on a XXL Stick PCB from Lab4450, but none of the other baffles available on here seem to fit - so i created my own version. They're a bit oversized because i first thought i'll create a…
Check the model here: https://a360.co/4noqwko This dust baffle is for the 4040 Pro Max CNC router machine. I printed them in the CR30 so I can print them in a whole piece, but I added a version of the piece divided into two parts, so you…
pest off bird feeder lower baffle ring. let me know how your print goes. https://roamwildproducts.co.uk/products/pestoff-lower-baffle-ring?srsltid=AfmBOoo3LIOl57ggXp-E1FfvHi_ZYASyRc6NfkshdljBYvBcEP1eZgeP
After printing the original and seeing my powercable has to lay on the netword card, I decided to add another hole to make the routing easier
This filter baffle directs flow to the surface and generates some turbulence - water now flows across the entire aquarium instead of creating a vortex directly below the filter. It also features a grate that forces some water to flow…
Pinbot mask baffle to prevent the GI from lighting the mask when not required. Perfect match with this: https://www.thingiverse.com/thing:3594512 Don't forget to say Thanks ;) Category: Toys & Games
Remixed version of drhollen's ZWO Seestar S50 light/dew shield - baffled that is automatically pushed off if the scope closes while it's fitted. I heated the top of the collar (opposite the push off tab so I could flex it to give a snug…
LED strip holder for 3030 extrusion with baffles to prevent looking directly into the lights Uses 3 M6 x 12 screws
Print this baffle alignment tool yourself instead of buying it from me. Makes installing your Peas 'n' Quiet baffles fast and accurate for max sound reduction performance. Use enough walls to make the narrow "stem" solid plastic (6 walls…
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
EDIT October 2021 - Several comments about the fit of screws and the like on this recently - the design is almost 3 years old at this point, and the printer I made it for was shipped in winter 2018. Given how 3d printer companies tend to…
Made to reduce glare on bright LED puck lights, especially on low ceilings like in a finished basement. These fit lights with an overall size of 7.25" (185mm). Print in black!
PinBot face baffle to block light bleedover for PinBots that have been converted to LED. Without this baffle, GI can leak into the mask area and ruin the surprise "face" effect when PinBot's eyes light up. Also the eyes are 24V flasher…
After purchasing the stepdown basket, I've forgot to order the baffle (black piece that sits on the edge of the basket to align horizontally), to adapt my 58mm Normcore tamper. So because of that I've designed the baffle based on the…
I put some inexpensive LED lights in my front yard that were too bright and too direct for my young and small plants. Pedestrians would complain of the bright lights coming from the yard. I designed and printed some PETG adjustable…
This id the updated holder for a Kicker DS 4" coaxial driver.
Created a end cap baffle for the daylight on a stick. As my voron 2.4 sit's next to me sometimes the LED shining through via the end is slightly annoying. You can see the difference in the image. This print is only the small baffle not…
Drop in replacement to fit a W3-2025SC. The T/S parameters of this driver are similar, but not exactly the same. The t-line should still be within tolerance to function properly, but performance likely changes slightly. My untrained ear…
Replacement Garbage Disposal Baffle. Mine was worn out from 30+ years of use. I keep forgetting when I go to the hardware store. We will see how long this works. Bonus Strainer. Not everything needs to go down there. TinkerCAD link for…
This recreated air baffle duct for IBM NetVista systems (FRU 09N5735) helps guide airflow through the chassis to improve cooling efficiency. The duct directs air across key components such as the CPU and motherboard, ensuring proper…
This is a basic airsoft supressor/silencer with internal baffles and printed threads. Easy assembly just put in the baffles (10x) with the narrow cone part towards the barrel and screw the back cap in. Btw you need to use 0.2mm layer…
I don't yet own a Prusa, but it's been brought to my attention that some Prusa printers in the wild are using the Meanwell LRS-350 24v PSU. If you own a Prusa machine that has a LRS-350 power supply, and would like to quiet its cooling…
UPDATE 04142026: This model was requested by another Printables member for his Prusa MK3s Plus. He also suggested I include an unbranded version so those who either prefer not to provide free advertising for manufacturers or would want to…
The popular PCB LED strips are excellent for lighting the small Voron chamber, but when mounted directly they tend to blind anyone trying to watch a print in progress. The baffles I designed prevent this by blocking direct glare when…
DireBynamics mod aka non-Kossher This model was created to replace broken Dt770 PRO drivers that cost a fortune with Koss KSC75 drivers. After clicking in the koss KSC75 - the whole construction can drop into the DT770 PRO cup. The Baffle…
Replacement/adapter part for Beyerdynamic DT770 PRO headphones, designed to allow installation of custom or replacement drivers in place of the original broken units. The goal of this model is to make the DT770 more repairable and…
I really liked Silencer \ suppressor \ moderator (lead dust collector) for airgun by Masochisti , but wanted it in one easily printable piece. I don't have any 40mm tube around and printing tubes on their own has given me a bad taste. I…
Standard dust separator carts double the footprint of your vacuum and love to tip over. This project utilizes the vacuum’s existing accessory/extension wand storage slots (just above the wheels) as structural anchors. By printing these…
Since I brought my garage printer, the Anet A8 Plus inside to do some maintenance, I decided the two 4010 fans I have in the electronics enclosure are just too noisy to bear, so I made this little fan baffle who's openings point to the…
A tool for measuring the interior geometry of saxophone and clarinet mouthpieces, for use with the mouthpiece design tool at mouthpiecelabs.com . Assembly and usage guide: visit https://mouthpiecelabs.com/docs/baffletool Print settings:…
Optimized airflow and a clean shop start with the right connections. This is a collection of custom-designed dust collection fittings and adapters specifically engineered for DIY Thien Baffle cyclone separator setups. These components are…
Designed to fit a standard Dillon Powder Measure tube, and sits nicely on the plastic hump at the bottom of the tube. Inspired by lee powder baffle https://www.printables.com/model/1137096-lee-powder-baffle by…
A simple internally baffled filler neck with a -10 ORB thread in the front to run to your catch can. If you want to try and 3d print this, I have provided a file with the threads modeled so that can happen. But I HIGHLY recommend sending…
Low profile base speaker baffle for 3 inch speakers. Clip mounted on top of monitor
I was looking at the first and second baffles (clear plastic cups) for my .22 FlashPup. The forward opening was huge, so I assumed they mass produced them for all calibers of QE equipped air guns. I designed this to try in my .22…
I design for a baffle for SoundTraxx speaker 810113 on a HO Athearn Genisis. Print Settings Printer Brand: Prusa Printer: Prusa Mk1 Rafts: No Supports: No Resolution: 0.25 Infill: 20% Filament: Solutech3D PLA White Notes: I used…
This is suppresor for Artemis SPA PP750. It has the right thread to fit the barrel. I've also done barrel cap replacement and custom K baffles meant directly into PP750 barrel. I've added second type of K-baffle with 8 holes in bottom.…
I have been using the cyclonic separator with the MPCNC but: It takes up room in the box and i keep adding more stuff so i had to evict it I also hated that my current mini-shop vac when i used for non CnC stuff would go straight to the…
