Pinbot Mask Baffle Tall w/ Additonal Tabs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PinBot mask baffle to shield bright LEDs for the eyes (or the GI outside the eyes) from bleeding into the wrong area.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 43
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
PinBot face baffle to block light bleedover for PinBots that have been converted to LED. Without this baffle, GI can leak into the mask area and ruin the surprise "face" effect when PinBot's eyes light up. Also the eyes are 24V flasher bulbs so they bleed easily the other way too. This baffle is 1 3/16" tall to match the height of the commercially-available 5 light baffle that goes below. There are three vertical slot tabs that can be used for initial positioning. Once you find the right height, you may optionally use the additional 4 tabs to pull the baffle tight against the backboard to ensure no light leaks through under the baffle. Major credit to https://www.printables.com/@Chnillapoil_211528 who provided the original model. This is just a remix that extends the height and adds 4 tabs.
AI (ChatGPT) was used to help generate the shape of the 4 additional tabs in OpenSCAD.