Counting matching models…
If you've lost or otherwise need a backup to the original puller for your precision pinball flipper, then this 3d printed version will do the trick. This design mimics the original, but requires a matching #6-32 nut to the screw, in order…
Twilight Zone pinball clock housing. The original tends to crack or get yellowish and is very expensive to buy.
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
I wanted to build a folgers can for my pinball machine so decided to give it a shot and here are the results. I originally set off to install on the lower left side below the ball return to try and limit the ball bouncing over that ramp…
I modified this bowling pin as I needed some type of mod to help block the ball from going off the left side ramp (lebowski) and getting stuck. Made some size adjustments and added a base for easier mounting. I'll also include my versions…
TL;DR version: a reupload of a model that dissapeared from Thingiverse. I have not yet tried printing this myself but you'll want to use TPU and supports. Details The Rush pinball machine produced by Stern originally came with metal scoop…
I am not a great pinball player but I love it. For my games I have at home I like to set them up to be easier for myself but also for friends that come over and are totally new to pinball. Some games are pretty hard for novices and it's…
18 pin single sided edge connector, in my purpose was for the display driver board for Williams system 3-7 games.
What can you expect in Detail? A variable width game controller from 50cm to 60cm adjustable. Nudge/Tilt with accelerometer gyroscope, adjustable on the screen. Variable Flipper Buttons position, for ergonomic handling. Touchscreen Menu…
Pinball Leaf Switch Holder with BSP G 3/8-19 Thread This is a 3D printable leaf switch holder for pinball buttons , designed to mount a standard pinball leaf switch directly behind a push button. The special feature of this holder is the…
This is a remix of another baffle on Thingiverse. The interior dimensions are 4 inches x 1.25 inches.
An easily adjustable (parameterized) 3D printed lockdown bar for real or virtual pinball cabinets. Options included with or without a center Fire button. This was mostly designed for virtual pinball cabinets that are often custom sized…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4S with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
Modeled after / for a WMS Full House pinball machine. Sized to use a 3mm screw with washer, or you may print the attached peg which should fit very snug to secure this with the leaf bracket.
This is a model of the side rail trim used on real and virtual pinball cabinets to protect the glass side rail plastic trim and the sides of the wooden cabinet. This model really isn't meant to be 3D printed - as it's very long. I guess…
I was installing a fire/action button on the lockdown bar of my virtual pinball machine. I realized that I didn't have a nut the right size to use to secure it to the lockdown bar, or a washer that would work with that. I decided not to…
VERY IMPORTANT: POWER OFF AND UNPLUG THE GAME BEFORE INSTALLATION Classic pinball machines were made at a time with more relaxed electrical safety requirements. There are many models out there with completely exposed or at least badly…
Use tree supports for balls. A compact tabletop pinball-style game with a spring-loaded launcher and scoring zones. Load the ball, pull and release the launcher, and aim to land in the highest scoring areas. The playfield features a ramp…
Its a fun game to play and its a unique thing to have so you just gotta print it.
This is the plastic part of a generic pinball machine shooter rod. It fits both, the Williams and current Stern shooter rods. It's intended as either permanent or temporary use if the plastic handle part shatters and there's no…
Print your own finned posts when you want to use a color not offered by current pinball parts vendors. Battle tested with hundreds and hundreds of games played in multiple machines, I've never had one break even with basic PLA filament.…
A 3D printable matrix ball guide for the Johnny Mnemonic pinball game. This is a commonly missing part on Johnny Mnemonic pinball games. The original is made of stainless steel. This is a close facsimile I made by looking at photos and…
Moody 2.1 alternativer Halter mit LED Beleuchtung für die Satelliten - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine alternative Halterung für das Moody Soundsystem 2.1 entworfen. Ich wollte die Satelliten von…
Glides for pinball machines so they don't damage your flooring, I printed with TPU filament @ 100% fill
I didn't care much for the flat plastic box that was the Drake Investments building, so I designed a bolt on skin for it. It comes in six pieces (front, left, right, back, lower roof, upper roof), and is designed to be printed in two…
For those of you who have run out of more places to add lights to your virtual pinball cabinet, let me introduce something you don't need: Backbox corner matrixes! I designed these to address a few particular things I noticed about my…
I made this version to support vertical mounting of the IO Node boards from Fast Pinball. The regular version is full height, with a cut out so you can see the status and to avoid some of the surface mount components along the left edge.…
this board has the correct board mount hole spacing of 55mm, the original will not work...this is for this build https://github.com/joeyoravec/stargate Category: Other
If you've lost or otherwise need a backup to the original puller for your precision pinball flipper, then this 3d printed version will do the trick. This design mimics the original, but requires a matching #6-32 nut to the screw, in order…
NECA Krang Android belt mount for mounting in a Stern TMNT pinball machine. The android action figure comes apart at the waist and can be inserted into this base. This print has tabs for the android figure to snap into. At the back of the…
Remixed to hold 8 extended pinball leg bolts. Bolt Size: 3/8-16 x 2-3/4 inch acorn head 5/8 inch Requires: 6 x 20mm M3 cap head screw Print Settings Filament PETG Layer Height 0.2mm Infill 15% Walls 3 Top/Bottom 4…
A clip I designed to hold a pair of strip lights I built so that I can stream pinball machines without worrying about the amount of light on the playfield. Print four, stick on magnets, and if needed install some metal panels on your…
This is a collection of post bumpers for Labyrinth pinball. These post bumpers fit over existing posts, and snap on like any other rubber. On most pinball machines the outlane posts are adjustable, to compensate for difficulty levels.…
Here's a little mod for Deadpool pinball. The figure can be obtained on Aliexpress.
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper (preferably…
This is a 4 level model of the JJP logo. Resize as you want, and set your slicer to change color at whichever level you like.
Shortly after converting my pinball machine to LED, I found that they were super bright and I didn't want to shell out for OCD boards just to dim them. Designed LED covers to absorb light and diffuse it more. Even with frosted bulbs, some…
I purchased the Stern Pinball Pro/Premium Speaker Lighting System (4") before the LE version (5 ¼") was announced. I later purchased upgraded 5 ¼" Alpine S2-S50 speakers and wanted to make the 2 purchases compatible. I carefully peeled…
This is a much more detailed speaker insert than the one that comes on the LE model or the ones that are found for sale on Pinside. This insert has the exact same dimensions and hardware holes as the insert that is included with Stern’s…
Swap out those black optical (opto) switch covers on the right ramp with these brick-style covers to make your game more… Labyrinth. Print Recommendations: material: PLA nozzle: .2mm-0.4mm layer height. .12-1.6mm
This is a plunger connector for allowing wires to run through the plunger shaft for an LED knob. Category: Toys & Games
Hollow pinball knob for adding Led lights into the plunger. Fits on a hollow 8.1mm plunger rod. Category: Games
This model has the same dimensions and hardware holes as the insert that is included with Stern’s Speaker Lighting System for Pro/Premium and for the LE. It’ll work as long as you have the 5 1/4” speaker plates. I've also created a…
Intro I designed a replacement coin chute for my friend's Ms. Pac-Man cocktail able, since this part can be hard to find and only seems to be available in used condition or NOS. Comparable products can be found here: Action Pinball - U812…
Hello, I have reproduced the ramp edge protection pad which bears the reference: rubber pad 626-5090-00 whose dimensions are 2×1.4×0,3 mm. I used TPU filament with 100% filling. You can reduce the filling rate up to 30% depending on the…
I created this handy little wrench to tighten pinball button nuts. I use it on my Stern pinball machine. I used PETG filament with 100% infill. IMPORTANT : with some slicers it is possible to encounter proportions issue. It is a know…
Use these light socket plugs to keep your sockets clean during pinball restoration, paint, and clear coating. You could just put old lamps in the sockets, but that interferes with the painting spray. These plugs are lower profile, a…
A fake virtual pinball door. I added key and button to simulate coins
a replacement for the ball trap bracket (hard to get in europe) for the getaway pinball machine
Twilight Zone pinball clock housing. The original tends to crack or get yellowish and is very expensive to buy.
I made this for a Bally drop target bank. I'm using a roller style micro switch. In the pictures it the switch I used off Amazon. *as of this upload, I have not tested it on my homebrew. Still have to get my coding finished.
Thanks for checking out the model! I wanted to make a pinball door for the ATLegends Pinball with no modifications needed, and this is the result of that process! (All links included are non-affiliated, and I don't receive any kickback…
English: "Fire" button plate found on Stern Pinballs to be placed on the Lockbar. Resize it considering the size of your button, in the part indicated in the photo. Português: Placa do botão "Fire" encontrada nos Pinballs da Stern para…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper (preferably…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4 with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the .pdf decals on 8.5 x 11" paper…
Pinball plunger nut tool to facilitate engagement of the plunger clamp nut on Stern pinballs. Print in PETG with 100% infill. An 8mm diameter and 2mm thick magnet is glued to the bottom of the tool.
Fits Afterglow 1.4, 1.5 and 3.0 boards. There is a version for screwing the PCB directly on the printed mount (_screw) and a version which uses M3 inserts (_insert). For WPC, you need to print the models with supports as one side is…
This is a mounting bracket I designed for the virtual pinball service board by Cleveland Software Designs. This is a two piece design, with a thick angled bracket mounted with screws inside the pinball cabinet at the bottom of the coin…
requires the precision disc requires adding weight between the disc and the topper. I used 2 quarters requires removal of the left factory clear plastic (I think, haven't tried to put it back on) Do not try to print the STL with the whole…
Add some color and flair with a custom backing/surround accent plate for your stern pinball machine. I tested this with my Jurassic Park Premium machine. I assume it will fit most modern Stern machines. The ones you can buy are acrylic…
Für einen Flipper benötigte ich eine Halterung zu den Heschen Spulen HS-0530B. Diese haben 12V 5N und 10mm Hub. Die Löcher zur Befestigung mit M3 sind hier exakt passend. Die Befestigungslöcher am Boden haben 3,5 mm Durchmesser. Die…
Upload of my model created in May 2024. It was printed on a Prusa Mk3S+. With the accelerometer mounted to the case, it can become overly sensitive if you modify the AtGames Legends Pinball Micro with any additional speakers, exciters,…
***UPDATE - I've uploaded a new model variation with wiring channel running to both eyes and mouth for LED lighting. This is an alternate Godzilla sculpt that's comparable in scale to the Mechagodzilla model (approx 6.5" tall). Print with…
A Godzilla pinball speaker insert modeled after the amazing "Atomic Godzilla 2: King of the Topper" sculpt by Jazzbouche/MOJO Mod on Pinside: https://pinside.com/pinball/forum/topic/atomic-godzilla-2-king-of-the-topper This insert has the…
These little guys are between $5.00 - $9.00ea usually. This is an alternative. I figured why pay that when you can something similar for free. This can cost upwards of $90 for one pinball machine. Depending how you printer prints you can…
These protectors are designed for the two cellar shots on Whirlwind pinball. On my game these were pretty worn, so these will both protect the game from further wear as well as make the shots closer to the original tolerance. They fit…
1/15/2025 - Added v2 model. Improvements: More secure fit around the wire guide Improved height - this should rest just under the flipper rubber, maximizing the ball surface contact zone without digging into or getting damaged by the…
I printed this in PETG with a 0.6 nozzle. This prints quickly with this nozzle and it's strong. I have this on all my machines.
Get better ball launches on your Stern Rush pinball machine! For TL;DR, skip to “Parts Required” below. This is based on the design that was originally released and sold by the NinjaCamp (NC) shop on Pinside. Unfortunately their shop at…
It was really a very interesting repair, because I had not yet modelled this kind of gear and I did not own the old gear as a model to help me. You can find the case with the engine on the internet but it is really not cheap. It really…
Print the Roll scene "curvey" side down. I used a textured plate for this. The Briefcase squarish side down. Pawn shop can be done with either flat plate or textured. TPU of course. I used an piece of shrink tubing with s small piece of…
I wanted to build a folgers can for my pinball machine so decided to give it a shot and here are the results. I originally set off to install on the lower left side below the ball return to try and limit the ball bouncing over that ramp…
I modified this bowling pin as I needed some type of mod to help block the ball from going off the left side ramp (lebowski) and getting stuck. Made some size adjustments and added a base for easier mounting. I'll also include my versions…
I made this model to fix the rattle ball when plunging from the shooter lane on the Godzilla Stern pinball machine. Printed it vertically to get a clean look and avoid any support. I printed using a Prusa Galaxy black PLA to be as close a…
A simple cover for my arcade machine and my virtual pinball machine. The cover is mounted on a wooden frame and measures 75cm x 23,4cm. Monitor and speakers are: 14.9 inch 1280x390 TFT LCD screen LTA149B780F JVC CS-J520X Car Stereo Speakers
I recently decided to put all my loose Gameboy games in Cassette cases and Pokemon Pinball just doesn't fit in one, so I started searching on the interwebs and found many on Etsy that cost a little more than I would be willing to pay, so…
This is a Theater of Magic Trunk. Theater of Magic is a Bally 1995 pinball game that is quite well regarded. The trunk is a main target and the original and replacements crack and break. Occasionally flexible replacements have been made…
As I am creating my personal Homebrew Pinball machine I have made a bunch of jigs. I have found other peoples jigs, but they didn't work for me specifically. I bought a cheap hand router off Amazon and a nice 3/16" bit (will link below).…
I designed these fan holders especially for my Stern Godzilla Pinball machine to avoid the coils fade. Since the flipper coils are pretty standard the holders can fit other pinball machines. They're compatible with 40mm fans. In my case I…
Update 12/07/25: I just released a follow up table : https://www.printables.com/model/1353120-3d-printed-mini-pinball-v2 Firstly I admit, this is far from perfect. Consider it the begining of a journey that's been fraught with dumb…
I designed this part as a replacement for woodrail pinball legs missing the bottom metal bracket that the leg leveler may attach to. This part should friction fit into the existing ½" hole of a wooden pinball leg. The threaded inside is…
This is a remake of Williams' moving 5 target bank guide rails. This rail part is what breaks in use, yet the it's not available as a separate spare part, the official part includes the targets themselves and their back plate. The target…
This is a remake of Williams' moving 3 target bank guide rails, based on my original 5-bank version. This has been modified by Hopeakuula regular RIK and is released here with his approval. This part is used in a lot of games, Who Dunnit…
A Deadpool insert for the speaker lighting on a a Stern Deadpool Pinball machine. Transparent filament to be used to suit Stern Lighting System. Any material or layer height should be fine.
A Deadpool insert for the speaker lighting on a a Stern Deadpool Pinball machine. Transparent filament to be used to suit Stern Lighting System. Any material or layer height should be fine.
TL;DR version: a reupload of a model that dissapeared from Thingiverse. I have not yet tried printing this myself but you'll want to use TPU and supports. Details The Rush pinball machine produced by Stern originally came with metal scoop…
this is an outlane guide for the williams indiana jones adventure pinball machine. the right outlane switch doesn't always trigger when missing the narrow escape. this guide makes sure the ball won't miss the switch. inspired by cliffy…
The .3MF file is ready to print on PrusaSlicer for the Prusa MK4S with MMU3 Assembly Instructions: Use a small amount of superglue for the lock bar first, then the side rails. Print and cut out the.pdf decals on 8.5 x 11" paper…
I added some supports on the Base to make it possible to print it standing upwards with minimal support to print it on smaller build plates. The supports also are good for the table, specially if you have to split it to fit on you build…
English: As I am currently building a pinball machine, I needed appropriate holders for the dual coils, e.g. for Williams/Bally FL-11630, FL-11629 . I couldn't find any here, so I quickly constructed some. I won't install them until…
German: Halterung um eine Frontplatte z.B. Flipper einzuhängen, damit diese klappbar und zu entnehmen ist. Ich habe diese konsturiert, um an meinem Flipperprojekt die Frontplatte zum einen, herauskippbar zu machen, aber auch, um diese…
A 6 ball caddy for holding your pinballs while you need to work under the playfield.... and you WILL need to work under your playfield. If it ain't broken, it ain't pinball.
English: For my pinball project, I needed a sleeve for the plunger (iron core) in the coil FL11-629 (also 630 + 640) This variant is for "my" core, with d=10.5mm. Approx. dimensions: sleeve outside - 12.3mm, inside - 11.0 mm length -…
Over time, the original steel ball guides near the base of the flippers get flattened and misshapen from repeated ball hits. This ends up causing ball hop as it transitions to the flipper. I've scanned and re-made the ball guides. I made…
2.5D recreation of the logo used on the Twilight Zone pinball table backglass
Print and Play Fun! Bring the classic fun of pinball to your desk with this fully 3D-printable Pocket Pinball game! This design features an optional desktop housing that allows you to enjoy a hands-free pinball experience, no need to hold…
This is a custom enclosure for holding all the buttons you need for a more realistic virtual pinball experience. It is the exact width of a Stern pinball table and has spots for the following buttons (left to right): Left Flipper Left…
