Pinball Flipper Buttons
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Standard 1 & 1/8 pinball flipper button. The thread is the same as standard flipper buttons so you can use the metal…
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 242
- Makes
- 1
- Views
- 1,001
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Standard 1 & 1/8 pinball flipper button. The thread is the same as standard flipper buttons so you can use the metal pal nut if you have it. You might have to drill out the retention clip hole to 1/16, I used a cut up paper clip for the wire. It works right off of the printer but it's a much smoother action if you sand the sides of the insert and the inside of the housing.
I used the thread library from arpruss for generating the threads. https://www.thingiverse.com/thing:2277141
Print Settings
Printer Brand:
Creality
Printer:
CR-10
Supports:
Yes
Resolution:
variable .1 to .2
Infill:
100%
Category: Electronics