Pinball Plunger (for a virtual pinball machine)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Parts to make a pinball plunger for a virtual Pinball.
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 137
- Makes
- 0
- Views
- 1,950
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
Parts to make a pinball plunger for a virtual Pinball.
Video of it:
It makes a satisfying clank when assembled and installed.
Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod.
In my build I used Qty 2 of 3" length springs with an approx 8 pound force rating. The Outer diameter of the springs is approx 0.7inch. One of the springs gets cut in half.
The switch is a "V7-2B17D8-048" which is overkill, but I had one lying around from a previous project.
The endcaps can be glued, and/or screwed in place. There are holes in the endcaps already, all you need to do is mark the rod, and drill a 1/16th ish hole for a screw.