Pinball Plunger (for a virtual pinball machine)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parts to make a pinball plunger for a virtual Pinball.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 1946
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Parts to make a pinball plunger for a virtual Pinball.
Video of it:
It makes a satisfying clank when assembled and installed.
Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod.
In my build I used Qty 2 of 3" length springs with an approx 8 pound force rating. The Outer diameter of the springs is approx 0.7inch. One of the springs gets cut in half.
The switch is a "V7-2B17D8-048" which is overkill, but I had one lying around from a previous project.
The endcaps can be glued, and/or screwed in place. There are holes in the endcaps already, all you need to do is mark the rod, and drill a 1/16th ish hole for a screw.