1 / 5
Kärcher Hose to 92mm Dust Collector — zdjęcie 1
1 / 5

Kärcher Hose to 92mm Dust Collector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

One Side fits the Standard Kärcher 58mm Hose with locking and the oder side fits a 92mm dust collector port / machine.

Ocena
0 / 5
Polubienia
0
Pobrania
15
Wydruki
0
Wyświetlenia
179
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

Adapts from the Kärcher 58mm Hose to any 92mm Hose or Adapter for any Dust collector.

Tested with the Scheppach DC100 Dust Collector and a Original Kächer Hose 2m long → Works perfect!

Locks tight with the Kärcher rubber ring on the Hose Connector.

 

Print Standing UP No Supports needed → If Stringing problems occur then print supports only for the locking mechanism.

 

Printed on the Ender 3 S1 Pro with 3DJake EcoPLA and 20% Infill.

Tagi