32 modeli
attachments for the Kaercher WD series vacuum cleaner. the head attachments slide on and off so no alteration needed. will also fits any unit that uses 35mm attachments support needed for most of the attachments. step fil include feel…
Slim Kärcher to osVAC Adapter. It uses my osVAC leak tight design, so you can insert a 37x32x2.5mm O-ring. If you don't have an O-ring at hand just leave it out, it will work as a regular osVAC coupling then. And the Kärcher vacuums have…
An adapter for the typical included tubes and vaccum tools from Kaercher WD ultra-slim design and fits tight. Another missing Kärcher WD adapter for the awesome osVAC system.
Simple nozzle for the Kaercher OC3 cleaner with five holes that results in a low pressure / high flow spray. Great for washing things down after cleaning if you just need more flow than provided by the default jet nozzle. Print…
DE: Stromkabel Halter/Haken für den Kärcher/Kaercher AD 4 Premium Aschesauger (warum das bei einen "Premium" Produkt nicht gleich dabei ist?) Befestigt mit Doppelseitigen Klebeband Gedruckt mit 70% Infill EN: Power Cable Holder / Hook for…
I needed a stand for my Kärcher battery-powered hand vacuum cleaner CVH 2 , so I made a mount to be placed on a wooden shelf. It is a two-part print to be able to hide the nuts and bolts that mount it to the wall. On the uploaded…
Sparepart for the Kaercher OC3 mobile washer. Lost mine, so I designed a part to replace it. Printed with .25 nozzle and 0,06mm layer height. Printing time is about an hour on the Ultimaker 2+. Have Fun!
Useful Adapter from Bosch Sander to Kaercher Vacuum Hose. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0.2mm Infill: 15% Filament: Saintsmart TPU Black Notes: No need for any additional…
Printed on my MK3S+ Printed in ABS, I had only blue, no yellow, no black. Designed with TinkerCad.
osVAC adapter for 58mm vacuum hose connector, fits the Kärcher hoses nicely. This design uses my osVAC leak tight design, so if you have a 37x32x2.5mm O-ring at hand, you can make the connection much more leak tight. If you don't have an…
I wanted to connect my Bosch C35 hose to my Kärcher vacuum cleaner, hence created this adapter. This allows to seamlessly connect to my Bosch Professional / Blue Powertools, e.g. my GKS saw. Printed in PETG with supports on printbed only,…
Da mein Original Ring gebrochen ist habe ich kurzerhand einen neuen Ring in Fusion 360 entworfen. Der Ring muss aufgrund von Layerhaftung stehend wie auf dem Foto gedruckt werden. Since my original ring broke, I quickly designed a new…
Kaercher Professional Vacuum Adapter for 50mm Hose Print the gasket in TPU or another flexible material. For the adapter, use PLA or PETG, positioning the 50mm side on the print bed to minimize the need for support material for the…
printed with PETG-CF with 25% infill and seems to be robust
Replacement nozzle. Print upright with brim, 7 walls. The model has a hexagonal drill holder molded on. This allows you to shape the cone onto the cone in the lance at medium speed (gets warm). then the part is cut off and drilled through…
As described the nozzle for our Kaercher vacuum cleaner was partially broken and did not work as good as needed. So I decided to measure the old part and design a replacement. Since I don't have another filament, I printed this one with…
Inspired by 3D4U by Miele Valuables Separator decided to make a valuables separator for the handheld vacuum which is more likely to be used near small items. It ensures that dust, hair and items below 2 mm get vacuumed, while any earrings…
It has always bothered me that the cable of my Kärcher vacuum cleaner hung around the cleaner and I was not really able to wrap it around something without having it dropping down all the way. Also during transportation it was a mess. So…
This is a drying stand for the Rollers of the Kärcher Floor Cleaner FC5 It's perfect to store seperate Roller pairs and to let the Rollers dry after cleaning. Dripping water is collectet sothat there is no more mess. Print Settings…
Adapter for vacuum cleaner Kärcher tube (kind a like bajonet) to DeWalt radial saw. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: Medium or Fine Infill: Your choice Filament: Your…
Innenrohr zur Reparatur eines Kaerchers (Handteil) Bodenstaubsaugers VC6300 Innenrohr wird nur eingesetzt
A holder for the pipes of a Kärcher SV7 Steam Cleaner to be stored in an Ikea Pax closet.
angled vacuum cleaner nozzles: 1 model for Makita handheld vacuum cleaners (OD 31.7 mm) and 1 model for Kärcher (ID 35 mm) . The nozzles are slightly conical for a snug fit. The nozzles with the small 10 mm end are ideal for inaccessible…
Fits Kaercher wd and others with Ø35. I needed an extra long variant.
Spare part, flexible role for Kaercher VC2 vacuum cleaner.
Use this adapter to connect a Kaercher vacuum hose to a pantorouter.Use this adapter to connect a Kaercher vacuum hose to a pantorouter.
AEG Kaercher Adapter für Mauerschlitzfräse
This is the model of an adaptor for https://www.printables.com/model/848504-big-cyclone-separator-for-a-vacuum-cleaner to connect a Kaercher WD vacuum cleaner. This is a substitute for the original vacuum connector. The nozzle of the…
I repaired an old Karcher pressure cleaner. As the original rubber foot would have costed me more than 20€, I decided to design and print my own. I do have the HD 790 model, but it should fit for the following models as well: HD 655 EURO…
⚠ DO NOT USE THIS TOOL SHORTLY AFTER USING THE STEAMER; ALWAYS LET IT COOL COMPLETELY ⚠ I had issues opening the lid of my Kaercher steamer after not using it for a couple of months. I didn't want to pry it open using a pipe wrench or…
240324 Kaercher T150 repair ring, 修復環, मरममत रग The Kaercher T150 is a patio cleaner low cost segment, it has a high wear on the ring that surrounds the cup. Mine was gone after a number of years cleaning the patio floor. I designed this…
Fits Kaercher wd and others with Ø35. I needed an extra long variant.
