Replacement nozzle for Kaercher vacuum cleaner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since my original part was old, used and partially broken, I reverse engineered the part by myself and printed it.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
As described the nozzle for our Kaercher vacuum cleaner was partially broken and did not work as good as needed. So I decided to measure the old part and design a replacement. Since I don't have another filament, I printed this one with PLA Prusament Galaxy Black, but I think for the lifetime circle for this part, at least PETG should be the better choice (The original part is made of PC, this is should also be a good choice).
The inner diameter is 58,2 mm. The wall thickness is 1,8 mm.
Print settings:
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm
Infill density: 15%
Support material: no
For print stability I added a 5 mm outer brim.
I also added the step files in case anyone needs to adjust anything.