Replacement nozzle for Kaercher vacuum cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since my original part was old, used and partially broken, I reverse engineered the part by myself and printed it.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
As described the nozzle for our Kaercher vacuum cleaner was partially broken and did not work as good as needed. So I decided to measure the old part and design a replacement. Since I don't have another filament, I printed this one with PLA Prusament Galaxy Black, but I think for the lifetime circle for this part, at least PETG should be the better choice (The original part is made of PC, this is should also be a good choice).
The inner diameter is 58,2 mm. The wall thickness is 1,8 mm.
Print settings:
Nozzle diameter: 0.4 mm
Layer height: 0.2 mm
Infill density: 15%
Support material: no
For print stability I added a 5 mm outer brim.
I also added the step files in case anyone needs to adjust anything.