1 / 1
Minisforum BD770i/BD790i/BD795i 92mm cooler mounting plates — zdjęcie 1

Minisforum BD770i/BD790i/BD795i 92mm cooler mounting plates

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple mounting plates to install 92mm fan into a Minisforum mini-ITX motherboard

Ocena
0 / 5
Polubienia
9
Pobrania
79
Wydruki
0
Wyświetlenia
1489
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Public Domain

The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. 

A 92mm cooler is the same width as the radiator. 

Hardware needed:

  • 6 screws for mounting the brackets to the radiator, they come with the motherboard already
  • 4 long screws for mounting the fan to the brackets, I recommend a Thermalright TL-B9 fan because it already comes with them. Or you can widen the holes a bit and use common self-tapping screws for fans, although I haven't tried it myself. 

I wouldn't recommend printing it in PLA, but PETG might be just about enough given that the chip loves to heat up to 90°C under some workloads. 

ABS/ASA or even nylon are obviously a better choice. 

For those who want to make their own mounts:

Distance between the screws in a row is 35mm, distance from one row to another is 125mm. 

Onshape link (warning: low effort)

Tagi