1 / 1
Minisforum BD770i/BD790i/BD795i 92mm cooler mounting plates — image 1

Minisforum BD770i/BD790i/BD795i 92mm cooler mounting plates

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Simple mounting plates to install 92mm fan into a Minisforum mini-ITX motherboard

Rating
0 / 5
Likes
9
Downloads
79
Makes
0
Views
1,489
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. 

A 92mm cooler is the same width as the radiator. 

Hardware needed:

  • 6 screws for mounting the brackets to the radiator, they come with the motherboard already
  • 4 long screws for mounting the fan to the brackets, I recommend a Thermalright TL-B9 fan because it already comes with them. Or you can widen the holes a bit and use common self-tapping screws for fans, although I haven't tried it myself. 

I wouldn't recommend printing it in PLA, but PETG might be just about enough given that the chip loves to heat up to 90°C under some workloads. 

ABS/ASA or even nylon are obviously a better choice. 

For those who want to make their own mounts:

Distance between the screws in a row is 35mm, distance from one row to another is 125mm. 

Onshape link (warning: low effort)

Tags