1 / 5
80mm PC Fan to 92mm Mounting Plate / Adapter — zdjęcie 1
1 / 5

80mm PC Fan to 92mm Mounting Plate / Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows you to install an 80mm fan where a 92mm one would go. Quick and cheap to print.

Ocena
0 / 5
Polubienia
7
Pobrania
53
Wydruki
0
Wyświetlenia
217
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike
  • This bracket allows you to use an 80mm fan where you would normally use a 92mm one.

  • I needed it to mount an old CPU fan to the back of a case but there are plenty of other uses.

  • You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan to the bracket.

  • Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.

Tagi