1 / 5
80mm PC Fan to 92mm Mounting Plate / Adapter — image 1
1 / 5

80mm PC Fan to 92mm Mounting Plate / Adapter

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows you to install an 80mm fan where a 92mm one would go. Quick and cheap to print.

Rating
0 / 5
Likes
7
Downloads
52
Makes
0
Views
214
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution — Noncommercial — Share Alike
  • This bracket allows you to use an 80mm fan where you would normally use a 92mm one.

  • I needed it to mount an old CPU fan to the back of a case but there are plenty of other uses.

  • You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan to the bracket.

  • Tested in PLA, printed at a 0.2mm layer height with 20% grid infill. It is working with no issues.

If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.

Tags