Counting matching models…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
Deutsch: Ringe um die Pflanzen im Mulch-Beet besser zu schützen. Das Wässern geht somit leichter und das Wasser fliesst weniger davon. Dazu sieht es noch sehr schön aus. Zusätzlich hat es noch an 4 Stellen kleine Löcher um den Ring mit…
Instructions as per cmh's source print. I had already been using a 75mm reference point with a less refined tool and the 80mm design by cmh works extremely well so I edited his design to suit. It seems that there is no set standard (I…
[IMPORTANT] THIS MODEL HAS CRITICAL ISSUES! I RECOMMEND PRINTING Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued…
Just lie out the moss on one layer, top it with the other and connect the two with the clips
The model from “mslo321” was modified by me. The original comes from “Man-in-Black” This bracket allows you to mount the Dell Wyse 3040 thin client horizontally or vertically on the wall, on surfaces or directly on the gantry. - you need…
180mm Vixen GP compatible rail with several versions. The rails are designed for telescopes on the smaller side. As the rails are made with 3D Printed plastics I can't guarantee a max load, so print and use at your own risk! The slots on…
This adapts a 80mm fan into the 40mm hole which has the nozzle exhaust chamber. I haven't got it working as the fan it's replacing is 24v and I don't know how to get 12v power to the fan. Check my other model which is the nozzle exhaust:…
This is a Qidi Plus4 rear vent cover which accepts bigger fans (80mm/92mm) and allows attachment of big poop/purge bin - https://www.printables.com/model/1055602-qidi-plus-4-purge-trash-bin
Supports: not needed Nozzle: 0.4mm Layer Height: 0.2mm Material: PETG or better heat resistant material (PLA not recommended) You need 4pcs M3x8 counterunk screws to mount the tabs to the adapter. You need 4pcs rubber anti vibration pads…
This bracket allows you to use an 80mm fan where you would normally use a 70mm one. My use case was to make a CPU cooler much quieter but there are plenty of other uses. You'll need 8 screws; 4 to mount the bracket and 4 to mount the fan…
Rain water collector diverter allows you to choose whether you want to send water to the tank or to the sewer Print in White PETG for 80 mm tube (2 screews 4x40 to fix handle) Optimized print profiles for Bambu Lab printers available…
This bracket allows you to use an 80mm fan where you would normally use a 92mm one. I needed it to mount an old CPU fan to the back of a case but there are plenty of other uses. You'll need 8 screws; 4 to mount the bracket and 4 to mount…
This case has been designed to replcae the lid of the GMKTec G3 Plus (Intel N150) to give active airflow to the NVME and RAM. Numerous variations/combos available: 80mm and 60mm fans 25mm and 15mm fan heights Enclosed or flat for mounting…
Update 11.03.2026 - fixed Right part of the chassis and the rear left arm - there were some incosistancies in between the left and right arms: Update to RUDE - 09.2025 I had some of the non-printed components available in my storage so…
Bracket to adapt dual 80mm fan holes to a 120mm fan. Made for a RAIDMAX Scorpio 868 case. Screw the fan to bracket first then screw the bracket to the case. Printed in PETG.
DE Beschreibung: Eine kleine Schüssel mit 4 Unterteilungen die sich platzsparend stapeln lassen. Geeignet für kleine Schrauben und Kleinteile von Modellbausetze oder Klemmbausteinbausetze. (Nicht nur Lego™!) EN Description: A small tray…
Discord: https://discord.gg/nJvfCKD2jx a community Server to chat share projects etc. small box for stuff like filament clips etc. Feel free to message me if you need something :D
Telescope light holder for taking flats Telescope is SV503 80mm Light: https://a.co/d/7RXPWSg
i play in my mind with geometry 8h work fuu print in Axis way..spin shore split flat cube rotating axle with small knife, and GO
This is a customized adaptor to attach the EufyCam S3 Pro to an 80mm rainwater pipe. I used an adhesive 12x3mm PU foam tape to fix it properly and have it protected against wind etc. You will also need M4 screws and nuts to attach it, the…
This motor is 80mm in diameter and is fully 3d printed in three parts; the stator, stator base, and rotor. It uses 12 10x3x60mm magnets and has 18 coils. You will need the magnets, 2 8mmx22mm skate bearings and a 8mm rod(at least 100mm in…
for 80mm 10t fans u get around 5mm clearance from the side pannel to the fans so theres no turbulant noise uses m3 and nuts for fan mounting and m2 screws check m.2 ssd clearance u can use supports and print in one peice if u dont want…
melt hex nuts into place to keep them in place dont forget to scale model picture is from original model with atmos 1 I do not consent to the sale of this model or any of its remixes in digital or physical form.
The fans on my RTX 3060 Ti just broke out of nowhere — one of those misfortunes that happen without warning and at the worst possible time. To make matters worse, they refused me the warranty, leaving me with a working graphics card...…
Designed for ventilation openings in windows and balcony doors. Diameter is 180 mm. Its adjustable structure allows it to be closed in bad weather. For installation, 1 × M4 bolt (the bolt length depends on your window modification;…
GeoCaching: Gabel - Öffnung 80mm - M6-Mount - Runde Spitzen 4 Modelle: 100 - Rund 103 - Rund - 4x Bohrungen Ø6.2mm 105 - Rund - 4x Bohrungen Ø6.2mm - Spitze 1x konisch 106 - Rund - 4x Bohrungen Ø6.2mm - Spitze beide konisch => My Faforite…
for 280x280 Qidi Q2 5x bulid plates dowel pins added mounting holes added multicolor option you need only support for the M3 counter holes you need also: 8x M3x20 mounting option: 4x wood screws 3mm
This is designed to securely grip an 80mm extractor hose onto a 70mm diameter tube. Effectively doing the job of a jubilee clip (though not adjustable) Directions Slot the TubeLock onto the hose (with the thicker grip facing away from the…
Simple rake head, 21mm handle required. Print Settings Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PETG Category: Outdoor & Garden
Louvre air vent used - https://www.screwfix.com/p/map-vent-gas-louvre-vent-white-229mm-x-76mm/4548d Fans used - https://www.amazon.co.uk/dp/B0C8CPZJ11 Printed in PLA with 0.6mm nozzle at 0.3mm layers, but any settings or material should…
Simple Easy to Print Solder Fume Extraction for 80mm fan Print uprights with no supports. Carbon filter can be added using additional housing between the fan and extractor.
Passend für ein Fallrohr mit 100mm Durchmesser. Der Abgang ist für einen Gummischlauch mit einem Innendurchmesser von 19 mm konzipiert UPDATE: V1.1 -> 10mm höher Ergänzung einer 80mm Variante mit ebenfalls 19mm Abgang
Cut our some power outlets then there was missing 1m of these Tehalit 80mm veneers. I am planing to do some with a motive or flexible to put some like colored pearls in them to something like pixel art :)! Could get awesome! Happy printing!
I made a holder for a 80mm fan with the posibility to use a regulator for the fan. So you can regulate to the optimal speed for you. I use it to cool the NVME SSD area in my computer. I designed the holder to use the backfan as…
Size Options Scale down in slicer for smaller options or request custom options. 240mm x144mm x 20mm Proposed Print Layout It seems to print best like this: I printed it flat and it's nice and squire, but some scarring occurred on the…
A demoness with maul, last two images show source image and PrintU render. Tried several attempts with makerlab PrintU to get something close to my source image, but this was the best I could muster. I added horns and replaced the…
Initally i had planned to cut a hole into the backplate and mount a 120mm fan but now i went a less destructive way the mount can be fixed with one M3x5 (theres already one whole in the frame) and then this fan…
Lens Cap for Silver 80mm 2.8 Could be that you have to scale it to compensate the shrink of the filament
Couldn't find any stacked skadis pegboards so I made one up in the slicer quickly. I'm guessing it's because it's much cheaper to just grab it from ikea instead. Did this with wet filament across different brands as a worst case scenario.…
🏷 Tourlabel Pro (150 x 80 mm) - Etiqueta de Identificación Robusta ¡Hola! Les comparto este diseño de Tourlabel creado en Fusion 360, ideal para marcar maletas de equipo, racks de sonido, mochilas o cajas de herramientas. Tiene unas…
This is a 80mm Fan Mount for the jetKVM you need 6 3x6x4.2mm m3 heated inserts and 1 3x3x4.2mm m3 heated inserts install: 2 3x6x4.2 heated inserts are for the cover. the other 4 3x6x4.2 are installed where the fan normally gets mounted.…
80mm Acoustic TPU Fan Spacer (12mm Depth) – Integrated M3 Threads Eliminate fan whine and structural vibration with our premium 12mm TPU spacer . Specifically engineered for 80x80mm fans , this spacer acts as both an acoustic buffer and a…
I needed more space behind a commercially available 180mm (7 inch) LED light fixture to accommodate older wiring and mounting hardware. This surround along with the accompanying spacer granted 24mm (almost 1 inch) additional room without…
This is an eGPU base based on the ADT-Link UT3G eGPU board, allowing you to connect a desktop GPU to any device with a USB4 or Thunderbolt connection. Useful for 3D scanning with smaller laptops, video games and whatnot and makes the…
Just a simple tube cap for a 80mm drainage pipe. The holes ensure that there is enough flow in the pipe if you want the water to gently flow towards a lower area while draining while it goes down.
Used on one of my old pc builds, 5mm spacers help with sound and performance. Category: 3D Printing
Just a slightly updated version of a great model to hide wirings and fan under the cover. Note that supports are now required.
Sturmtiger tank, modelled to the one in War Thunder (stowage, details, etc. look exactly the same). It has the Raketenwerfer inside it, and the crane is meant to be glued in. This can be printed by both FDM and resin printers, although…
Two part XL Storage drawer with various compartment sizes for precise sorting and storage, ideal for crafts etc.
This is a compact 80mm sliding lock designed to be printed in two interlocking pieces. The parts print already assembled and are free once removed from the build plate. Designed to be glued onto flat surfaces — no screws required.…
This is a remix of the Mamiya 6 50mm lens hood by August DeHainaut. A quick thanks to Reddit user u/bacchus10 for providing the dimensions of the original Mamiya lens hood. The reason that the Mamiya 6 50mm lens hood was chosen as the…
The model was created from scratch in Onshape, but is based on a model I found on Thingiverse I loved the concept but needed to make it work with a 25mm thick fan and not make me lift the printer any higher than it already is. I also…
This is the projectile from the only tested atomic artillery cannon https://en.wikipedia.org/wiki/W9_(nuclear_warhead) there was scarce information out there for this one, so i primarily based my model off of the non- nuclear version of…
I made this model to connect the 100mm hose from my Mintion Filtration System to the 80mm fan duct of my 3d Printer tent.
For removal only. Do not tighten down your centercaps beyond hand tight or risk shearing the centrecap. Ask me how I know. I needed an 80mm spanner for the centrecaps on my Rotiforms, so I designed one. Not specifically for me, but for if…
Remixed an existing dual 80mm fan to add a third fan for my application, and added fan cable brackets.
Schachtel mit Deckel. Abmessungen: Länge 180mm, Breite 100mm, Höhen von 30mm bis 120mm. Gedruckt mit PLA ohne besondere Einstellungen ……………………… Box with lid. Dimensions: length 180mm, width 100mm, heights from 30mm to 120mm. Printed with…
If you're here it's because you've sheared your center cap in half from overtorquing it. Because same. This replacement part can be clipped into the aluminium section, and then i'd recommend using a soldering iron to melt the plastic down…
Made for Sovol 80mm fan MBO cover. Glue parts together. Design from grizzie17's Intake Fan Silencer Flowmaster PSU
A pause is applied during printing to allow for the insertion of an M8 nut. After printing, the nut is permanently printed. Do not scale! PETG/ABS temp. 230 , no supports . Pod czas druku zastosowana jest przerwa w celu włożenia nakrętki…
Sink strainer is designed for durability and high volume. Features a tapered pattern to maximize water flow and a reinforced rim for a flush fit in standard drains. Ideal for kitchen or utility sinks where standard strainers often…
I really liked the original BentoBox idea, but after building one I wanted something with better airflow and less noise. The original 40 mm fan setup worked, but it was louder than I wanted and did not perform as well as I hoped. So I…
I purchased the GMKTek m6 plus to act as a little plex server to sit in the livingroom so i wanted to add a noctuna fan to keep the volume at a good level. I also like retro gaming and I have recently revisited my youth with lightgun…
I bought AC Infinity dual 80mm fans to help cool my 10" mini server rack (LabRax). This fan mount is designed to pull air in from the front and blow upward. It takes up 2U in the 10" mini server rack.
I got tired of the factory grommets that came in my Uplift Desk -- the common variety where you rotate a piece inside to "clamp" the cables. The problem with the original design is that it does not hold the cables securely, and the inner…
Since I self-source my hardware, and the mag springs arrent available in my country, I have decided to make a mod inspired by the poor man's talons with the use of the retractable ID lanyard. I have also split the mag with dovetail joints…
Rear lens cover for Mamiya-Sekor 80mm f/2.8 and 105mm f/3.5 lenses. May also fit other models with 31mm diameter of rear lens elements. Please let me know what other lenses work and I will update the description UPDATE (March 1, 2026):…
A cover for Ender 3 pro power supply (Meanwell PSU) which allows using a much quieter standard 120mm (or smaller) computer fan. Instead of a small high rpm 80mm fan we can use a large low rpm PC fan making the PSU virtually silent.…
This is an exhaust adapter for k40 laser driver for design: To be fully printable on the bed of Ender 3 (23x23 cm) 80 mm tube outlet size Compact, have to replace the original fan, using only the inner screws (an in line fan will be…
Il s'agit de ma première conception. J'avais besoin d'un manchon 80-80 pour raccorder une gaine flexible pour VMC. J'ai fixer l'ensemble avec un collier riselan.
1 month update: Still going strong! No catastrophes yet ;) Print on side as shown, no supports. Highly recommend printing with PETG, but if you only have PLA, I've included some notes below. Jar may slide down and rest on brim if heavy…
Print from PETG or another material that can withstand 70°C. (PLA also seems to work from personal Experience, holding without deformation for more than 30hours at the max temperature). This is cut into quarters with a Lap joint to be…
Emergency spool for 180mm build plates with inner diameter of the Prusament spools (and many others) and compatible with Bambulab AMS (inner hole diameter is 55mm) I call it ‘emergency’ because Prusament spools are usually taller than…
You are doing me a big favor by clicking the Like button :-) I use a silent two speed fan Print without support Shopping list: 1 x 3 mm red led + resistor 5.6k of stepdown converter 12 to 2 volt 1 x Microswitch 15 x 10 mm 1 x switch 8 mm…
This is a holder for 8025 Cooling fans. The bracket and screw works with all glass from 2-13mm. Each Holder needs 3 screw to complete the build. 2 Screws are enough if the wire management cover is not used. 1 DC Connector Cover is needed…
Cheaper balcony pots are made of thin material, I designed a strut that does not allow the central part to expand, the width of the pot is 180 mm, measured from the edge, in highly sunny places I recommend making it from a material more…
The screw holes should enable a flush surface to mount to. I left the brim on because I think it looks good. Printed in PLA 0.1mm layer height
Awesome Original design by Triple G Workshop. All credit to them! Refit for a tighter and cleaner look including rounded edges.
Extended 90 Degree mount for GoPro / Kasao Camera. If you would like to buy me a cup of coffee .
A simple model for assembling an activated carbon filter to an 80 mm fan to filter out soldering fumes.
It is almost the same as the original but bigger to fit bigger cream tubes.
I have a 80mm pipe so edited the hose adapter part using the Fusion 360 file. Get the mounting plate from the original. https://www.printables.com/model/911760-qidi-q1-pro-100mm-exhaust-system
Allows you to mount an 80mm fan to a 140mm bracket, Usefull for pc cases that supports 140mm(x2) and 120mm(x3) don't tighten the screws too much it will bend the plastic over time With this adapter you can have 140mm(x2) and 80mm(x1) at…
A keystone faceplate with 80x80mm dimensions as commonly found in Europe. Angled so the keystone fits inside shallow wall boxes. Keystone fit optimized for Telegärtner AMJ-Modul K, but should also fit most other keystones. Category:…
Got tired of getting sawdust on my stones. Designed to fit a set of diamond stones that are 8x3x0.3", or 205x80x8mm. I also have a strop the same size that I glued onto a piece of 3/8" ply, so the top slot is slightly taller (14mm). It…
