Print-In-Place Glue-On Sliding Lock | 80mm Compact Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a compact 80mm print-in-place sliding lock designed for easy surface mounting using adhesive. The model prints a
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 50
- Makes
- 0
- Views
- 150
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a compact 80mm sliding lock designed to be printed in two interlocking pieces.
The parts print already assembled and are free once removed from the build plate.
Designed to be glued onto flat surfaces — no screws required.
Dimensions:
Length: 80mm
Width: 25mm
Height: 17mm
Ø6 locking feature
Integrated sliding slot system
Features:
Print-in-place design
No supports required
Compact form factor
Clean mechanical look
Easy to scale if needed
Printing settings:
0.2mm layer height
3 perimeters recommended
PLA or PETG
Ensure good first layer accuracy for free movement
If your printer is tight on tolerances, slightly adjust XY compensation.
Remixes and improvements welcome.