Counting matching models…
New version of the wallet available here Update 04/08/2022 : I changed the tolerances, it should now be less tight for the cards. I also made a little change to prevent the last card from going behind the mechanism. These updates are only…
This is a collapsing Katana sword designed to be printed as one part. Its only 182mm high when printed but expands to over 825mm in total length! The Replaceable Single Edged Curved Blade Version is available to my Clubs members. Supports…
I decided to modify my previous model (5 in 1) Fidget Toy Spinner I wanted to get rid of the bearing and make the whole fidget smaller to fit the keys well. And as a bonus, I modified the model for print in place. So just print and click…
This collapsing Katana is designed to be printed as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
Print approx. €5.42–€6.63 excl. taxPreliminary estimate for one variant
This phone/tablet stand is designed to be as universal as possible, print in place, and fold flat while being very durable. It comes in 3 sizes. Each variant is designed around its specific load. Small - 52x83x3mm - About the size of a…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for one variant
Official Remix "Extra Size Cat" is released!! https://www.printables.com/model/1146999-official-remix-flexi-extra-size-cat-print-in-place Since there were many requests for longer cat, I decided to release it as an Official Remix. This…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for one variant
This is a collapsing Lightsaber designed to be printed as one part. Its only 205mm high when printed but expands to over 950mm in total length! Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on…
Print approx. €11.95–€14.61 excl. taxPreliminary estimate for one variant
TRAILER An elegant bag clip designed to be printed in place as one piece with minimal supports. Once printed, the clip is freed into 3 hinged components. The design uses a specially designed cam to give the user a mechanical advantage and…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for one variant
If you enjoy this model, take a look at the new F23 Glider: https://www.printables.com/model/456057-f23-ultralight-glider-print-in-place or a glider starship:…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Taking inspiration from my original fidget toggle switch , I designed a print-in-place version that uses about 8 grams of filament and takes about 20 minutes to print on my X1C. This model is experimental (it's definitely still a…
Print approx. €0.43–€0.53 excl. taxPreliminary estimate for one variant
This version of the Drill Sword prints complete all as one part. The Replaceable Blade Version is available to my Clubs members. Supports are not required, for best results use a .4mm nozzle. Find detailed instructions on how to print…
This print was a request from someone, I figured why the heck not? I honestly learned a lot through the design and print of this one about clearance dimensions required for 3D printing without having the layers stick together between…
Replacement level for the open/close function of a Bonavita "Wide Base Porcelain Immersion Dripper" coffee maker. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Infill: 50 Filament: n/a PETG Category: Kitchen…
This is a mount I designed to house a replacement speed controller module that I used to replace the OEM control board on my Harbor Freight 7x10" mini lathe. The OEM boards have a tendency to burn out really easily when under load, so…
Simple replacement for the keyboard foot, fits K270 K260 K275 K200 models
3D printed tool to replace Honda Tool 07916 - KA50100 Used to remove and install the steering stem nut on 226 different Honda Motorcycles. The nut I designed this part around is P/N: 53229-MN1-650 You can check fitment by clicking here ,…
Need a scratch your back? No problem! Print in place model with lock mechanism. No supports! From fast print with layer 0.35mm to 0.2mm work pretty well. I recommend use PETG. Easy to transport due to fold-ability! Folded version is 140…
4 cylinder print in place hand crank engine Frame of the engine is: 73.5 mm/2.9" long 51 mm/2.0" high 12mm/0.5" thick Material used at 15%, 2 wall outline: 33.07 g/1.2 oz 10,999mm/433 in There are small parts so bed adhesion is critical…
The original Mercedes Star on my kids' tractor disintegrated, so I created a replacement one. This is for the Rolly Toys FarmTrac MB 1500 / MB-trac.
This is a custom replacement axle designed for the Tuttobimbo Italian vintage toy train.. If your original axle broke off, this 3D-printed part serves as the replacement to restore your classic toy. Features: Compatibility : Specifically…
This cap replaces the original one that cracked on my TAL water bottle. I have a XL with 5 tools, so I made it for multimaterial. There are 2 colors of PETG, a TPU ring that allows the cap to be deformed and slip back into the original…
WIP - the handle is maybe 0.2mm too long over it's entire length, and there's not enough margin on the “boltway” parts: I cracked my handle slightly while putting them in. But it fit on line, so I probably will not fix this model, unless…
A collection of ratchet locks ranging from 50mm - 90mm to replace any broken ones. There is a notch on one side of the ratchet lock that is flipped on some ratchets. I'm not sure if this is a left spin/right spin difference, but my cobolt…
Two basic tow hooks designed as replacements for broken toys. I presume you can scale these up. Recommend PETG and boosting perimeters. I needed to use supports on the bigger one.
A simple yet working 3D printed bearing, works just fine and can be used for any purpose. Printed with 0.4 mm nozzle. Printing & post-processing Print in highest possible resolution. Minimalize the stringing. Use any lubricant to…
The Verathon Bladderscan BVI 3000 is using 6 cells NiMh 7.2V battery. It is expensive, hard to find, expensive to renew and moreover uses a proprietary charger which is brittle and often missing, super expensive on the second hand market.…
A replacement for the broken arms of a Gravitrax Catapult. Print Instructions: Simply import these two models to your slicer and cut the models in the centre. Thus, each model prints as 2 parts that can be glued together. It also works…
A super simple dishwasher sign that's print in place, and has multicolour using a single extruder Printer! I had a problem where there were many dishwasher signs, but they were too complicated, and needed multiple parts! so i designed my…
A simple print to replace a missing hard drive caddy for the Corsair SPEC-04. There is only one file, so mirror this in your slicer to have both sides. Prints easily on the narrow edge without a brim, although I recommend it if you are…
3D-printable replacement blades for the extruder cooling fan. The cooling fan placed in front of the extruder's heat sink has the important job to keep things cool above the hot end. By accident and a bit of bad luck the fan blades can…
There is a small print in place catapult that can launch marble sized objects. The bigger catapult has the perfect size for ping pong balls. No supports required - best to print in petg 🔧 Key Features: Big Catapult: perfect for ping pong…
Jan 2025. You probably should not use this, there is a better way. You can clamp to the metal buts on the front of Wasp, like the official “dragon” BCAR does that was released by Colonel Wasp themselves. ------------------------- NOTE:…
The main problem with finding a replacement was that the holes in the wall are 20 mm apart and I didn't want to drill more holes. Since I couldn't find a suitable holder in the DIY store, I simply modeled a replica of the old holder. The…
Modeled in Tinkercad Sliced in Prusa Slicer 0.4mm nozzle SPEED profile PETG
Pièce de remplacement pour une poignée de verrouillage de verranda d'un ami référence au dos de la pièce d'origine : 723.2151
Lesson Plan & Constraints: The Objective of this print in place project was to take an image online and trace that image in the software Solidworks and make it a 3D object within a 8cmx8cm constraint box. While doing this my partner and I…
AnkerMag Go and Apple MagSafe Currently Supported This is a print in place stand based on my recent designs , the purpose of this version is a travel friendly version. Print Profile I recommend using ABS,PETG or ASA, PLA can deform from…
The trailer hatch of a toy car broke - so I had to design a small replacement part. Thankfully the original part was mounted with just one single screw.
--- English version below --- Das Gehäuse eines der Magnetschlüssel für die Schubladen-Kindersicherung ist auseinandergebrochen. Daher habe ich einen simplen Ersatz für den inneren Magneten erstellt. Passt für einen Rundmagneten D 20mm /…
Hook for Brabantia profile. Print on it's side with supports Material: any except tpu ofcourse lol If you want one for the spacer let me know I left it like this for ease of printing
Gear fidget model with double helix gears and gear rack. I finally learned how to make a gear rack myself according to videos and tutorials. Since I really like gears and their movement, I will try to invent other similar toys. The…
So today a part which holds the tensioning thing on my Samson SR850s has decided to snap. After 5 years it's understandable I guess. Print instructions: Low layer height, like 0.2 or 0.1 mm (because of in-design supports) 0.4 nozzle…
SUMMARY Are you a diehard fan of the Celtics, just love basketball, or like this clover design? Meet this fun awesome telescoping 9.2 cm × 9.4 cm × 2.0 cm clover that moves intricately with a hypnotizing design. With a fidget like this,…
I printed two of the 1:12 size, which makes it just a little too small for Skittles and M&Ms. One in PETG and one in PLA. The PETG supports removed a little less clean, other than that, supports off, then snap the legs down and up and…
Everyone has one, like pens they vanish into some parallel dimension, they do break if you really need them. A folding ruler 2m to measure furniture, rooms or makes. This model provides print in place hinges which are pretty durable.…
Unfortunately, the rear footboard covers on the Soflow MyTier e-scooter protrude far and are very fragile. You often get caught on door panels and tear them off, breaking them every time. Because of the thin wall thickness, a repair with…
These are replacement Tetrimino pieces for the Tetris Dual game. I had bought this game at a charity shop, but there were a few pieces missing. It was playable without them, but made it a slightly unfair game. I decided to model the…
This is a hollow D20 you can print in place and when it's done, hang up from the top (there's a 3mm hole) and fill with small things, like candy or regular sized dice. I tried to print it a few ways and ultimately rotated it so one number…
I needed a small case to carry my earplugs so I designed this box. But it can be used to store all kinds of small items that need protection. It requires 2 cylindrical magnets with a diameter of 3mm and a height of 2mm. It is a print in…
The power button on my box ended up coming loose and eventually falling off. I made this button to replace it, you need to disassemble the outside of the box and then put the button inside. I printed with PETG.
It's me again! After some further feedback about my original mechanical iris and its version 2, I have now added two handles, which make it much easier and more convenient to operate the mechanism. The wider tolerances stayed the same as…
This model is released under a No Derivatives license. If you would like to make a derivative version with your logo, or have us make one for you, you can get in touch at [email protected] via e-mail to discuss licensing terms. I hand…
Update : The TPU gasket finally failed last week. (mid Jan 2026). So I got a good year's use out of about 30 cents worth of TPU :D Ongoing saga of dealing with this toilet that came with the house. Nothing steams me more than paying like…
Reparaturteil des originalen Auslösehebels für die Füllstandsanzeige des Auffangkorbes. Etwas verstärkt im Vergleich zum Originalteil. Empfohlenes Material: ABS oder PETG. (PETG hielt zuletzt ca. 3 Jahre bei häufigem Gebrauch des Mähers)
A handle and latch replacement for Frigidaire's mini fridge, model FFPE4533UM. Modeled after the stock handle and latch plate. Includes a high and low latch panel if the fit isn't correct. Does NOT include the tooth column that sets…
This is a replacement paddle for Haier fridges. In order to install, you need to first remove two screws at the front just behind the display Remove the display by folding it forward and lifting up Remove 4 screws which allows you to take…
This arm guard starts at 8cm and expands all the way to 31cm! I do not recorment printing with supports. I printed this model with the A1 Bambu Labs printer on 0.16mm wall thickness, but 0.3mm should work.
It is a shelf to be hung on the door of a cupboard in the kitchen or bathroom. Use strong double-sided tape to attach to the door.
For my visit to the Formnext convention this year in frankfurt I wanted to have a custom makercoin/keychain to trade or give out. After thinking about it for a while I got the idea for a formnext themed keychain. Since I didnt want to…
Replacement foot pad for Quilter 202 Series Amp / Amplifier Head! Tested on Overdrive 202, but should work for Tone Block 202.
It's a Christmas decoration and a fidget toy at once! What could be better? Print it in place and turn it to create a bauble. Important: Make sure to print the tolerance tests first to find the right tolerance for your printer (most…
My towel rack broke so you know what had to happen!
Command hook designed for a simple print. Just import and print, no supports needed. If the command hook is used for heavy items, i would suggest increasing the infill and outter later walls. ✨If you like what I make ✨ Like, follow,…
Version 2, Sun Dec 20 2024 Replacement shell for repair of Storz-Bickel Mighty vaporizer. USE AT YOUR OWN RISK Please watch the temperature, do some research before choosing the right material & use. Please share your experience! Hope you…
I'm glad to present to you the Grass Wyvern + Keychain Edition 🐉 Print in Place model, printable without support structures. The joints of the little keychain version could be a little bit stiff (depending which filament used). Make them…
A fuse puller/placer for 5x20 mm and 6x30 mm fuses (glass/ceramic). Model The tolerances have been tight enough that the fuses snaps into position. Printing I have printed these in Prusa PETG-CF (Carbon Fiber) with hight strength in mind.…
english Replaces the broken snapper of the Deuter backpack “Gigant” Recommended thickness: 0.1 mm - 0.15mm Perimeter: 3 Infill: 40 - 60 Material: PETG Fusion 360 file included Update 2026-feb-01 Over time, it has become apparent that the…
Simple desing of Print in place Locomotive Print instruciton: Support: No Material : anything you have Stay with us here and on my social media www.instagram.com/jp_3d_design
Simple desing of Print in place Train 1 Print instruciton: Support: No Material : anything you have Stay with us here and on my social media www.instagram.com/jp_3d_design
Simple desing of Print in place Train 1 Print instruciton: Support: No Material : anything you have Stay with us here and on my social media www.instagram.com/jp_3d_design
Simple desing of Print in place Train 3 Print instruciton: Support: No Material : anything you have Stay with us here and on my social media www.instagram.com/jp_3d_design
Not actually a functionally necessary part. You can totally live without one, but it was a nice little 3D design training project. Printed mine in PLA, 0.6mm nozzle 0.2mm layers. Fits snug and secure. Wife loves it, which is important for…
The oak floor registers we purchased had one major flaw - the pin that held the cover against the base was very fragile and broke off leaving the cover loose and the floor register wide open. I searched high and low for a replacement and…
This is one of my first designs, I try to make things that are functional it is a replacement base for costa travel cup, after dropping and breaking, although can be used for customising as I made it sightly deeper for text to image to be…
Replacement latch for a Staples File Box File Portable Tote, part numbers 140165/111112 or 140163/110997. Print from PETG or similar for a mix of flexibility and strength. PLA is not recommended as it is likely to be too brittle.
These are knobs that you can print with multiple layers - slice the grey inset light colour first, then slice the main body of the knob second and run the G-code twice.
Replacement feet for the logitech G915 keyboard (both with and without numpad). Background : I printed out riser attachments for the feet so that the keyboard is at around a 20-30 degree incline. This however over time hurt my wrist so i…
About the A-7 Corsair II The LTV A-7 Corsair II is an American carrier-capable subsonic light attack aircraft designed and manufactured by Ling-Temco-Vought (LTV). It was developed during the early 1960s as replacement for the Douglas A-4…
This is a good replacement for original WD-40 straw which really hard to install, I always have issue with that. This straw replacement firmly sit on WD-40 can, but if you have issue to store can with the straw, then you find clip useful,…
About the J35 Draken The J35 Draken is a Swedish fighter-interceptor developed and manufactured by Saab between 1955 and 1974. The Saab 35 Draken is known for, among other things, its many "firsts" within aviation. It was the first…
Hi Makers! Ball mount is incredibly weak on El Grande Gopro pole, made out of brittle plastic which breaks at first opportunity. There is no official spare part and the head can not even be easily removed as it is molded in the tube. As a…
This is a highly-detailed HO-scale intermodal container, printed in one piece.
This is a replacement for a size 2 deep six diver. My last one broke and they are very hard to find in local stores so I reverse engineered it and put the printed one together with all the hardware from the broken one, except the rear…
NEW: Homing bump variant is now available! This model is made to fit into the standard key switches that come with the Voyager. It is definitely not as high quality as the ZSA caps. This will not allow light through it unless you print it…
v3 replacement cd holder for 95-05 gm vehicles. it's for people that don't use CDs and want to use the space for something else like put your favorite stuffed animal monkey or your tools for your secret talent of lock picking. this is…
replacement cd holder for 95-05 gm vehicles. it's for people that don't use CDs and want to use the space for something else like put your favorite stuffed animal monkey or your tools for your secret talent of lock picking. this is public…
• Printed with: Prusa MK4 • Material: Generic PLA • Nozzle size: 0.4 mm • Print time: Approx. 1 hours Not for sale.
Use something different to hold your ring, this box opens in a unique way. The box itself is print in place, I used 0.4mm nozzle with 0.2mm layer height and fairly standard settings. The ones shown in the pictures are Bambu Lab PLA Matt,…
Replacement headband clip for the Sony WHCH710N headphones. Modeled in Solidworks based on the unbroken one I had.
This is a remix of a z-motor mount made by Albatrossity: https://www.thingiverse.com/thing:2754633 The original mount worked mostly well. However I found that the top plate that gets mounted to the 2020 extrusion wasn't thick enough and…
This is a Gravity, or motion, deployed Hidden Blade. Inspired, obviously, by Assassin's Creed. Printed at 0.15 mm Layer hight, 15% infill, 3 walls, and in PLA. You will need support for the locking tab at the front of the main housing. I…
Wir haben den kompletten Playmobil Vergnügungspark und es gab leider den Motor dazu 5556 nicht mehr zu kaufen. Man braucht zu diesem 'Teil zusätzlich noch einen Getriebemotor und eine Batteriebox mit Schalter Motorern: HALJIA TT-Motor,…
About the F-111 Aardvark The General Dynamics F-111 Aardvark is a retired supersonic, medium-range, multirole combat aircraft. Production models of the F-111 had roles that included attack (e.g. interdiction), strategic bombing (including…
