Pull Copter Finger Ring - Print in Place
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of agepbiz's Pull Copter Finger Ring. No assembly required!
- Rating
- 4.613 / 5
- Likes
- 298
- Downloads
- 2,668
- Makes
- 31
- Views
- 7,472
- Reviews
- 31
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
This is a remix of agepbiz's Pull Copter Finger Ring.
No assembly required! (Although you do need to remove some support material.)
I merged the ring and frame parts together, removed the no-longer-necessary screw holes, and changed some overhangs to optimize printing for the new orientation.
Because I had to change some of the overhang orientations, the copter_key (pull cord) needs to be mirrored from the original.
If you would like to use a longer pull cord, I recommend this one by Gered. Just make sure you mirror it in the slicer before you print it. (In PrusaSlicer, right click the model, go to “Mirror”, then click “Along X axis”.)
Print instructions
copter_ring_print-in-place.stl needs to be printed with supports. The auto-generated 'on build plate only' supports work just fine.
The 3MF file has the copter_ring_print-in-place, an unmodified copter_rotor, and a mirrored copter_key. It also has settings for supports on the copter_ring only.
The gcode is sliced directly from the 3MF with the default Prusament PETG profile.
__________________________________________________________________
🧡 Let’s Both Earn Some Prusameters!
If you like this model and are thinking about getting a new Prusa printer, use my referral code @SpeakingOfBrad at checkout. You'll earn some Prusameters, and so will I, which helps support my future projects.