1.75mm Filament-Splicer-Guide Print-in-Place
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.47 – €3.02 net (excluding VAT)
For file: Filament-Splicer-Guide_0.2mm_ASA_MK3SMMU2S_2h46m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.74 excluding VAT (range midpoint).
- Weight reported by the author
- 16 g
- Print time reported by the author
- 2.77 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Print-in-Place 1.75mm Filament-Splicer-Guide
- Rating
- 4.267 / 5
- Likes
- 222
- Downloads
- 2,193
- Makes
- 18
- Views
- 10,318
- Reviews
- 15
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required!
Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch.
Proof of concept - Not yet tested.
Use with a soldering gun, slide in the left/right side after connection is made and allow filament to cool.
May need weld bur removal with a knife or sandpaper.