Counting matching models…
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…
I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts. A single edge razor blade is used for the…
Hi, This is my filament splicer/joiner that I designed for the purpose of consuming entire rolls of filament and also enabling multi-color prints. I also made a spool holder to clamp to my desk. Splicer will fit desks up to 30mm and the…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
I was inspired by https://www.thingiverse.com/thing:5233832 . However I decided to draw my own model because: I have different magnets I like rounded shapes I want to have possibility to press it only from the top I want more precision…
The jig us actially optional; the magic is the silicon tube! You can do it without that jig, but it will help holding the filament while welding. After printing the jig, you may need to use a cutting knife to make the cutouts fitting for…
I was searching for a good way to splice belts, and there are a number of methods I found, but of them all, this seemed to be the best, and it's incredibly strong, I tried to pull it apart and I couldn't. I found an old forum post, I…
It never fails. I always seem to have a partial spool of filament that isn't enough to do a project with. This is my attempt at using all my partial reels of filament. You simply clamp the two pieces together and slide a piece of filament…
0.2 mm layer height 15% infill 10 pcs. Neodyme Magnets 5*1 mm I used a storm lighter for the splicing.
AUTO FILAMENT SPLICER (AFS V1) USING YOUR 3D BOWDEN PRINTER (e.g. Ender 3/PRO) (see also optional AFS V2 below, as late addition) I have searched for various filament splicer projects and watched numerous videos, but I couldn't find any…
Not recommended for high pressure or fuel applications. Hose in photos is a 1/4" I.D. x 3/8" O.D. Clear Vinyl Tubing. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped…
I was inspired by Lemanito's Vit Sport Filament Connector. But I bought the connector from AliExpress and had other magnets in stock Parts required : Filament Connector: https://de.aliexpress.com/item/1005005743810577.html 2 Screws M4x60:…
Hier mal eine Variante zum Verbinden der Filament Reste von pick013, Vielen Dank!
Print-in-Place 2.85mm Filament-Splicer-Guide based on akamaka's design. I adapted the original part with larger diameter slot to accommodate 2.85mm filament. The part printed well and the hinge worked perfectly once you break it loose. I…
Do you have numerous filament ends that just take up space? Do you want to join 2 spools together? Well now you can! Introducing the Slidey Filament Splicer This is a simple filament splicer i created in Fusion 360. The design includes 2…
Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.
Update (3/3/25): Added a 3 wago version due to a request. For those that have heaters with the fuse already integrated and only need 3 wagos for L/N/E. Was looking for a bed wago mod to make removing the bed easier during maintenance and…
mold melted filament into the desired shape and size. use supports everywhere to obtain best outcome.
This is an add on for LoboCNC's filament splicer. I liked his design so much I designed a clamp to force his splicer together to free up your hands while using it. I printed this using PLA but you can use any filament you have on hand. My…
I printed this on Anycubic Kobra 2 Neo. 15% infill with 0.04 nozzle. I used PLA which seems to work fine but PETG would work as well. I used a length of PTE tube approx. 3" long. Insert the 2 filament pieces into the tube so they meet in…
An allways mounted cooling tray for Fujikura 70S fusion splicer. Splicer do fit in transport box with the tray mounted.
I printed the right and left halves of the mask as provided, with no supports but one side has to be flipped 180 in the slicer app. I couldn't do anything with the original whiskers that stand on-end so I made some to print horizontally.…
This is a filament splicing jig, I recommend printing it in PETG or more heat resistant plastic. I changed the original model to use heat set inserts (M3x5x4) and to also use PTFE tubing that has an Outer Diameter (OD) of 2.6mm. Here is…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 3/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 1/2" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/16" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with…
Clampable and boltable filament holder to help splice filament with Sunlu splicer
i made this stand compatible with 8 x 3 magnets
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
A print for splicing two cables together with up to 6 wires. My use case is splicing two USB cables together without using tape or anything to protect the wires from each other. Can be used for cables with up to 6 wires. Includes a long…
Not perfect but serves its purpose well.
A Filament Splicer you can use to splice together remainings. It's design to work with capricorn tubing inserts on the wider channels, one on each side of the cut out. In order to keep both halves together, either gluethem or solder them…
Filament splicer retainer for holding the 2 halves in place while splicing. The splicer comes with two retaining bolts and a clamp which I found cumbersome to user. Set those bolts and camp aside and simple lift out the joiner from this…
Easy splicer for 1.75 mm filaments Metal or ceramic base for heat sink 2 x Heat Sink Radiator Cooling for Electronic Chip IC With Thermal Conductive Tape available Aliexpress, Amazon or Ebay etc for around £2 for 10 size 20 x 20 x 6mm…
LDO 2x2/3x3 JST XH Splicer PCB mount for 2020 extrusion
I don't know how this will hold up over the long term, but I thought it was worth trying. As I write this, it is March 26, 2026; I hope to provide an update in a year or so as to how this worked out (or sooner if it breaks!). I have a…
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would do and that's design up a solution. It's a tight fit, but hey, that's what you want. The OD of this splitter w/out the…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2 Infill: 20% Filament brand: Sunlu Filament color: Green Filament material: PLA
This is a handle that can be use with 1mm wire and make a loop as long as you need. i used stainless steel welding wire. It als needs a countersunk M8x20 screw to lock the wire underneath the screw head. Don't forget to post a make and…
For use with a 1.6mm stainless steel welding wire. to splice rope. i also use two M4 nuts and two M4 set screws to fasten the welding wire.
2020 extrusion mount for LDO XH Splicer.
Magnetic Filament Splice Tool This is my attempt to design and make a filament splicer that is reusable and magnetic. I have a lot of filament spools that are too short to use, so I decided to design a filament splicer that has magnets…
Filament splicer using an old E3D V6 hot end and Klipper configuration. Please not that you have to fabricate a part in in aluminium or steel in addition to print the remaining parts in high temp ABS/ASA. Sample Klipper config:…
D splicer holder D splicers are a great tool to have on the boat. They make working with Dyneema so much easier and once you the options you have with dyneema you will start using it more and more. Downside of a D splicer? The price, its…
Modifications were done using Prusaslicer. The cassette tape SVG was created by Abdulloh Fauzan from Noun Project (CC BY 3.0) The font is Inter . under SIL OPEN FONT LICENSE Version 1.1 .
Une poignée pour réaliser une aiguille à long châs, utile pour faire des épissures sur de la tresse creuse type Dyneema. Vous aurez besoin de fil inox diamètre 1,5mm environ, j'utilise personnellement le toron central de câble inox 1 x 19…
A minimal shelf for holding a Sunlu filament splice on a multiboard panel.
Mount a CAT6 cable splicing block. Printed without supports. You can use a M4 or a #8 screw to secure the block. I have to warn you that once the block is attached to the mount it is not easy to remove. I had to slide teasers under one…
Use existing fenceposts as support (such as for a shade structure or roof) by extending them upwards. The next size down fencepost serves as an insert connecting the existing fencepost to the extension fencepost. For example, we have 40"…
I don't know how this will hold up over the long term, but I thought it was worth trying. As I write this, it is March 26, 2026; I hope to provide an update in a year or so as to how this worked out (or sooner if it breaks!). I have a…
License: Attribution-NonCommercial-NoDerivs CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is…
License: Attribution-NonCommercial-NoDerivs CC BY-NC-ND This license allows users to copy and distribute the material in any medium or format in unadapted form only, for noncommercial purposes only, and only so long as attribution is…
