1 / 1
DIY filament splicer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament splicer using an old E3D V6 hot end and Klipper.
- Rating
- 5 / 5
- Likes
- 10
- Downloads
- 30
- Makes
- 1
- Views
- 374
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- GNU General Public License v3.0
Filament splicer using an old E3D V6 hot end and Klipper configuration. Please not that you have to fabricate a part in in aluminium or steel in addition to print the remaining parts in high temp ABS/ASA.
Sample Klipper config:
[heater_generic splicer]
heater_pin: P2.5 (replace with the pin you are using)
sensor_type: ATC Semitec 104GT-2
sensor_pin: P0.24 (replace with the pin you are using)
control = pid
pid_kp = 38.450
pid_ki = 1.633
pid_kd = 226.374
min_temp: 0
max_temp: 250
[verify_heater splicer]
max_error: 2000
check_gain_time: 3600
heating_gain: 1
hysteresis: 5