1 / 4
Filament Splicer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Filament Splicer you can use to splice together filament remainings.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 69
- Makes
- 0
- Views
- 1,222
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
A Filament Splicer you can use to splice together remainings.
It's design to work with capricorn tubing inserts on the wider channels, one on each side of the cut out.
In order to keep both halves together, either gluethem or solder them together as in the pictures.
Tips:
1.- Make sure bothe filaments are as straight as possible to help with alignment.
2.- Once joined move the joint back and forth inside the capricorn tube while it cools down, to ensure proper movement in the hotend and the tubing.
I hope you find it useful.