1 / 5
Filament Cutter for Splicer
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament cutting jig that creates matching 45 degree tips for splicing the ends together.
- Rating
- 5 / 5
- Likes
- 520
- Downloads
- 1,584
- Makes
- 8
- Views
- 10,394
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts.
A single edge razor blade is used for the cutter; always be careful when working with sharp tools, and store the jig out of reach of children and animals.
Parts Required:
- One single-edge razor blade
Printing Notes:
- PLA works fine for this model.
- Print using 0.15mm layer height, structural, 15% infill.
- Supports are not required.
- Please DO NOT use the .bgcode file that has been provided (always slice your own files for your specific printer, filament, environment, etc.). The files were only included to provide a reference for approximate print time.
Miscellaneous Notes/Comments:
- When trimming the filament ends, place the cutting jig on a firm surface, as a fair amount of force is required when pressing the blade through the filaments.