1 / 5
Filament Cutter for Splicer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament cutting jig that creates matching 45 degree tips for splicing the ends together.
- Ocena
- 5 / 5
- Polubienia
- 521
- Pobrania
- 1575
- Wydruki
- 8
- Wyświetlenia
- 10 354
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 8) (Komentarze: 14)Remiksy (1)Kolekcje (657)Powiązane
I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts.
A single edge razor blade is used for the cutter; always be careful when working with sharp tools, and store the jig out of reach of children and animals.
Parts Required:
- One single-edge razor blade
Printing Notes:
- PLA works fine for this model.
- Print using 0.15mm layer height, structural, 15% infill.
- Supports are not required.
- Please DO NOT use the .bgcode file that has been provided (always slice your own files for your specific printer, filament, environment, etc.). The files were only included to provide a reference for approximate print time.
Miscellaneous Notes/Comments:
- When trimming the filament ends, place the cutting jig on a firm surface, as a fair amount of force is required when pressing the blade through the filaments.