118 models
Print-in-Place 1.75mm Filament Splicer Guide - no respoling required! Filament Prusament ASA with 0.2mm layer with variable layer (smallest possible layer) for the filament guiding features hinges and latch. Proof of concept - Not yet…
I recently purchased a Sunlu FC01 Filament Connector to splice filament remnants onto new filament spools. This model was created to trim the filament ends with uniform, matching 45 degree cuts. A single edge razor blade is used for the…
Hi, This is my filament splicer/joiner that I designed for the purpose of consuming entire rolls of filament and also enabling multi-color prints. I also made a spool holder to clamp to my desk. Splicer will fit desks up to 30mm and the…
This is a remix of Wire Splice Mold by t2pain2 on Thingiverse https://www.thingiverse.com/thing:6316585 Changes from the original: - Split into two models for easier slicer arrangement. - Re-scaled to properly fit 14AWG wire without…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
Cartella organizzatrice per giunzioni in fibra ottica impilabile. Stackable splice tray folder for fiber optic splices.
I was inspired by https://www.thingiverse.com/thing:5233832 . However I decided to draw my own model because: I have different magnets I like rounded shapes I want to have possibility to press it only from the top I want more precision…
The jig us actially optional; the magic is the silicon tube! You can do it without that jig, but it will help holding the filament while welding. After printing the jig, you may need to use a cutting knife to make the cutouts fitting for…
Just heat the two ends of the filament with a solder iron and push. Then trim the excess plastic. The hinge uses about 40mm of filament to be inserted. Print two of the model, it should fit perfectly with itself. Clamp with a paper binder…
I was searching for a good way to splice belts, and there are a number of methods I found, but of them all, this seemed to be the best, and it's incredibly strong, I tried to pull it apart and I couldn't. I found an old forum post, I…
Here is an update on a previously posted filament splicing jig. I added cutting guide, improved the overall strength, and added m3 knobs. All the needed hardware to complete is: 4 x M3 Nuts and 2 x M3 16mm Hex Socket Bolts The standard…
Keep your wiring neat and secure with this 3D printed Wago connector box . Designed for the popular Wago 221 splicing connectors , this housing keeps your connectors firmly in place and makes your setup more organized. 🔧 Features: Fits…
Fiber optic cable termination / splice/ repair box for small drop or blow cables. Termination and repair after damage.
It never fails. I always seem to have a partial spool of filament that isn't enough to do a project with. This is my attempt at using all my partial reels of filament. You simply clamp the two pieces together and slide a piece of filament…
0.2 mm layer height 15% infill 10 pcs. Neodyme Magnets 5*1 mm I used a storm lighter for the splicing.
I have many nearly empty spools of filament that are needlessly taking up space. If I'm starting a new project, I like to start with enough filament to complete it. I've manually spliced filament in the past using a lighter, then sand the…
AUTO FILAMENT SPLICER (AFS V1) USING YOUR 3D BOWDEN PRINTER (e.g. Ender 3/PRO) (see also optional AFS V2 below, as late addition) I have searched for various filament splicer projects and watched numerous videos, but I couldn't find any…
Not recommended for high pressure or fuel applications. Hose in photos is a 1/4" I.D. x 3/8" O.D. Clear Vinyl Tubing. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped…
This is a set of Cable splice jackets designed to be used with scotchcast cable jacketing resin for making inline tether splices for underwater vehicles or other electrical cable repairs. It's designed to fit the 8mm yellow blue robotics…
I was inspired by Lemanito's Vit Sport Filament Connector. But I bought the connector from AliExpress and had other magnets in stock Parts required : Filament Connector: https://de.aliexpress.com/item/1005005743810577.html 2 Screws M4x60:…
I designed this splice box in my free time to help the company I work for to acess fiber optic cables in our building. I designed this custom box, because it had to be placed in a fuse box. Of course you can use it anywhere else. It is a…
Print it in the orientation it was downloaded in. No supports. Solder your wires together and isolate them by taping each down with kapton tape. Fill with epoxy or hot glue or something when done. This is for 3mm aux cords and 4mm aux…
These are presser feet designed to fit many sewing machines for splicing pieces of line to create eyelets, especially useful for example in paragliding or kiting. I've designed around low and high shank machines that I own, namely Pfaff…
Hier mal eine Variante zum Verbinden der Filament Reste von pick013, Vielen Dank!
Print-in-Place 2.85mm Filament-Splicer-Guide based on akamaka's design. I adapted the original part with larger diameter slot to accommodate 2.85mm filament. The part printed well and the hinge worked perfectly once you break it loose. I…
Do you have numerous filament ends that just take up space? Do you want to join 2 spools together? Well now you can! Introducing the Slidey Filament Splicer This is a simple filament splicer i created in Fusion 360. The design includes 2…
Splice tray to organize fiber optic junction
Wire Splice Mold For Use With Hot Glue. Print In High heat Filament At 100% Infill. Hold Closed With Bull Clips.
Printed with PLA at 0.20 no problems. Print it right side up, as printing on face results in a bad finish in the tape groove.
Update (3/3/25): Added a 3 wago version due to a request. For those that have heaters with the fuse already integrated and only need 3 wagos for L/N/E. Was looking for a bed wago mod to make removing the bed easier during maintenance and…
A simple splice block based off ¼" tape splicing blocks but for the width of cassette tape. I use it with a thin razor (it actually is the blade from a PTFE tube cutter) but I think an Xacto knife will work as well. Just like with a ¼"…
mold melted filament into the desired shape and size. use supports everywhere to obtain best outcome.
This is an add on for LoboCNC's filament splicer. I liked his design so much I designed a clamp to force his splicer together to free up your hands while using it. I printed this using PLA but you can use any filament you have on hand. My…
I printed this on Anycubic Kobra 2 Neo. 15% infill with 0.04 nozzle. I used PLA which seems to work fine but PETG would work as well. I used a length of PTE tube approx. 3" long. Insert the 2 filament pieces into the tube so they meet in…
An allways mounted cooling tray for Fujikura 70S fusion splicer. Splicer do fit in transport box with the tray mounted.
I printed the right and left halves of the mask as provided, with no supports but one side has to be flipped 180 in the slicer app. I couldn't do anything with the original whiskers that stand on-end so I made some to print horizontally.…
This is a filament splicing jig, I recommend printing it in PETG or more heat resistant plastic. I changed the original model to use heat set inserts (M3x5x4) and to also use PTFE tubing that has an Outer Diameter (OD) of 2.6mm. Here is…
This is a splice to repair a soaker hose. The inner diameter of my soaker hose was roughly 15 mm. This pushed in to place and did not leak. Time will tell. Also created an end cap. Printed in PETG with three perimeters on the higher end…
I find that the regular Creality Splice Kit for the CR-30 3DPrintMill a bit long for everyday use in my space limited apartment. This 3D printed version gives you an extra 180 mm for parts to roll out. The vertical height of the roller…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 3/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 1/2" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
Protects spliced optical fiber as it exits standard metal splice protector. Fix the fiber using tape on both ends. There are versions with total length of 80mm-120mm (8mm for tape on each side). 4x4mm space for the splice. Feel free to…
These are divider tokens to separate the new categories of Baddie chips (Break, Krelln, Mech) found in the expansions Undertow and Unbreakable for the board game Too Many Bones. The dividers were inspired by the design of Fabmaszter. Each…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/16" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with…
I was very impressed with the original model, but the hole in the 3-way was too small for my application, 14/2 Romex, so I remixed it to fit. In the cover photo, the original is on the left and my remix is on the right. (I started with…
Dust Splice Coupler Adapter - from 4" Flex Hose to 4" Flex Hose (based on POWERTEC 70123 O.D. Splice, 4", Black *). Print as oriented. Prints without supports. Usually prints faster and stronger if you up the number of perimeter walls so…
Clampable and boltable filament holder to help splice filament with Sunlu splicer
This is a model based on the fiber optic splice tray by @lipos. Compared to the original, I have added holes for zip ties to secure the cables. I have also strengthened the lid, because original was quite flimsy.
i made this stand compatible with 8 x 3 magnets
Just a simple guide for splicing filaments. Needed to splice an end of a spool to a new spool, so I threw this together real quick. Its a simple device so beauty isn't a requirement, so any quality speed and no support. 10-25 infill…
Not recommended for high pressure or fuel applications. Intended for hose/tubing with 5/8" inside diameter. Assemble printed parts with E6000, super glue, 2-part epoxy, or similar adhesive. Prints may need their seam scraped smooth with a…
A print for splicing two cables together with up to 6 wires. My use case is splicing two USB cables together without using tape or anything to protect the wires from each other. Can be used for cables with up to 6 wires. Includes a long…
Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose. As mentioned, this is styled after POWERTEC 70123 O.D. Splice, 4", Black, available here* , yet tweaked/shortened to make it print more quickly than a 1-to-1 mimic would print.…
Not perfect but serves its purpose well.
A Filament Splicer you can use to splice together remainings. It's design to work with capricorn tubing inserts on the wider channels, one on each side of the cut out. In order to keep both halves together, either gluethem or solder them…
Filament splicer retainer for holding the 2 halves in place while splicing. The splicer comes with two retaining bolts and a clamp which I found cumbersome to user. Set those bolts and camp aside and simple lift out the joiner from this…
Easy splicer for 1.75 mm filaments Metal or ceramic base for heat sink 2 x Heat Sink Radiator Cooling for Electronic Chip IC With Thermal Conductive Tape available Aliexpress, Amazon or Ebay etc for around £2 for 10 size 20 x 20 x 6mm…
This is a model of Batman beyond from the old cartoon show in the old cartoon. There was an episode where he was caught and tied up where he actually was injected with the splice chemical which caused him to be spliced with as a bat, and…
Just a small jig for splicing filament. Remix of original. Added small hole in bottom to mount if needed and beveled holes for guiding filament in. Hole diameter is 1.78mm Recommend scale up to 115%-118% for smoother filament motion
LDO 2x2/3x3 JST XH Splicer PCB mount for 2020 extrusion
This End Splice Clamp is an excellent solution for end-to-end gluing and assembly of parts. An opening in the clamp allows you to glue to parts together while they're clamped in place, guaranteeing they won't move before the glue sets.…
To post process I put a piece of 400 grit sand paper on a sheet of glass and wet sand the mating faces until flat. Apply mold release. You can use vaseline thinned with a bit of mineral turpentine (mineral spirits) in a pinch.
I designed these things to keep underground low voltage wire splices dry and clean. There are many different products available to do this job, but most of them are either messy, difficult to use, or unreliable. I modeled the general…
I don't know how this will hold up over the long term, but I thought it was worth trying. As I write this, it is March 26, 2026; I hope to provide an update in a year or so as to how this worked out (or sooner if it breaks!). I have a…
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would do and that's design up a solution. It's a tight fit, but hey, that's what you want. The OD of this splitter w/out the…
After struggling with the tiny, thin solder pads tearing off my cheap 10mmx4wire RGB LED strips when making custom splices and installs in furniture I designed this solderless clip. Sure, there are commercial solutions for this problem,…
Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: .2 Infill: 20% Filament brand: Sunlu Filament color: Green Filament material: PLA
Chess board with raised letter/numbers around the perimeter. The board is printed in 4 quadrants with a splice plate that overlaps the inner four corners. The perimeter also has rectangular channel for the connectors to snap into, 4 are…
This is a handle that can be use with 1mm wire and make a loop as long as you need. i used stainless steel welding wire. It als needs a countersunk M8x20 screw to lock the wire underneath the screw head. Don't forget to post a make and…
Strain relief in order to splice a flat audio cable to two 22awg wires (third wire in cable was not used).
Splice tray with adjustable loop length. For optical fiber joints.
Coupler for two pairs of banana jacks. It will fit a standard 4.2mm banana plug and has standard 0.75” on center spacing. A360 viewer link.. http://a360.co/2I8qf2G Print instructions Category: Electronics Post-Printing Cut two 5mm brass…
For use with a 1.6mm stainless steel welding wire. to splice rope. i also use two M4 nuts and two M4 set screws to fasten the welding wire.
2020 extrusion mount for LDO XH Splicer.
Magnetic Filament Splice Tool This is my attempt to design and make a filament splicer that is reusable and magnetic. I have a lot of filament spools that are too short to use, so I decided to design a filament splicer that has magnets…
Filament splicer using an old E3D V6 hot end and Klipper configuration. Please not that you have to fabricate a part in in aluminium or steel in addition to print the remaining parts in high temp ABS/ASA. Sample Klipper config:…
Container / feeder for double SMT tape 8mm. Holder tailored to Recco's workplace. Update: New models 1. Mounted with screws (4mm) 2. Mounted with 30mm Nano tape 3. Clear back (can be mounted with thin double-sided tape)
D splicer holder D splicers are a great tool to have on the boat. They make working with Dyneema so much easier and once you the options you have with dyneema you will start using it more and more. Downside of a D splicer? The price, its…
Rather than spending a bunch of time swapping filament to print out color swatches, I decided to use my Filament Splicing Jig to piece together all of my colors beforehand and then print the tower in one fell swoop. And to make it print…
This is just a little jig to help splicing microphone cable (or other cable). The diameter is 0.3 inch, and length is 1 inch. There are 3 channels along the length to allow the spliced wires to maintain their separation. To use this, cut…
A jig to hold your fiber drop gel splice kit in place while you're doing your work. Best to print in a bright colour if you're using one of those see-through plastic kits, the contrast will help you see what you're doing. There's a hole…
This model prints in two halves to allow cables that have been spliced to be inserted and protected by the shell. Then the two halves can be screwed together with 4 M3x8 metric screws and hex nuts. The photo is of my prototype that is not…
An optical termination box for up to 12 fiber splices. You can choose 6 or 12 port variant, and up to two splice trays. Face plate fits standard optical connector (tested for E2000/APC and SC pigtails with 2m leads). Tested with cable…
18650 battery case DIY can be spliced expanded I used battery contacts set https://www.sigmanortec.ro/set-contacte-baterie-aa-plata-plus-arc
I designed a snap in cover that protect a drip irrigation straight splices. These work with RainBird brown 1/2 drip tubing straight splices. The purpose for creating these was that I keep breaking these with a string trimmer when there…
This is designed for use with two-piece curtain rods, where one side fits into the other and has a plastic bit to prevent the parts from sliding. This is a replacement for the original version and is helpful when automating curtain…
Modifications were done using Prusaslicer. The cassette tape SVG was created by Abdulloh Fauzan from Noun Project (CC BY 3.0) The font is Inter . under SIL OPEN FONT LICENSE Version 1.1 .
Additional clearance to allow the box to close properly with M3 socket head screws.
Need a handy way to hold your splice sleeves? This will mount onto your Fujikura 70 model splice machines. Push the boxes on the the rear pillars of the machines. Holds 12 splices EASY. I designed it to mount a commscope chip for extra…
Une poignée pour réaliser une aiguille à long châs, utile pour faire des épissures sur de la tresse creuse type Dyneema. Vous aurez besoin de fil inox diamètre 1,5mm environ, j'utilise personnellement le toron central de câble inox 1 x 19…
A splice jig to help make consistent cuts in open 6mm XL belt. You will need this jig, a knife, a 15mm wide ruler, and super glue to make a belt splice. Use the 15 - 17 mm wide ruler against the stops to guide your cut.
Коробка для оптического механического соединителя
The fan is normally held in place by two small screws through the mounting points on the corners of the fan housing, but if those mounting points break the fan will come loose and no longer direct airflow across the splice core properly.…
This is a lid/box for the Splice & Dice Build a Tyrant organizer from “ Too Many Bones Trove Chest Organizers von js500 ". My file only contains the lid, designed by me. To print the organizer itself use the link given above. MY PRINT…
A minimal shelf for holding a Sunlu filament splice on a multiboard panel.
After converting the Ford 860 to an internally regulated alternator I removed the external voltage regulator and decided to make an easy splice point for wiring the tractor. The 6 Center Studs are number 10's I used a hex head #10/32 that…
Designed to organize a long strip of extremely cheap two connector quick splice terminal blocks. They are available from many vendors listed as “push quick connectors”, “spring clamp terminals” and many other names. These are handy for…
A compact 3D-printed splice box for repairing or extending Ethernet cables (Cat5e/Cat6) without crimping tools or soldering. Designed for 8-wire UTP/TIA-568A/B layouts, it features: 8 parallel wire slots to align pairs easily Side notches…
