1 / 7
Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose (based on POWERTEC 70123 O.D. Splice, 4", Black) — image 1
1 / 7

Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose (based on POWERTEC 70123 O.D. Splice, 4", Black)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

For dust collection: allows 4" flex hose to splice onto 4" PVC thin-wall pipe (aka S&D or "sewer and drain") with clamp.

Rating
5 / 5
Likes
22
Downloads
71
Makes
0
Views
447
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose. As mentioned, this is styled after POWERTEC 70123 O.D. Splice, 4", Black, available here*, yet tweaked/shortened to make it print more quickly than a 1-to-1 mimic would print. 

  • Print as oriented.
  • Prints without supports.
  • Usually prints faster and stronger if you up the number of perimeter walls so it prints solid. 

Note: this is a faster print, smooth, that requires use of a hose clamp. If you want to print something with threads that won't require using a clamp, but would take longer to print, you could go for something like this (not my design): https://www.thingiverse.com/thing:4061125

Also note: If you are wanting to splice 4" flex hose to 4" flex hose, I also have a printable “1-to-1 mimic" of the  POWERTEC 70123 available here: https://www.printables.com/model/1077997-dust-splice-coupler-adapter-from-4-flex-hose-to-4 

 

*Amazon link is an affiliate link