Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose (based on POWERTEC 70123 O.D. Splice, 4", Black)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For dust collection: allows 4" flex hose to splice onto 4" PVC thin-wall pipe (aka S&D or "sewer and drain") with clamp.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 447
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Dust Splice Coupler Adapter - from 4" PVC to 4" Dust Hose. As mentioned, this is styled after POWERTEC 70123 O.D. Splice, 4", Black, available here*, yet tweaked/shortened to make it print more quickly than a 1-to-1 mimic would print.
- Print as oriented.
- Prints without supports.
- Usually prints faster and stronger if you up the number of perimeter walls so it prints solid.
Note: this is a faster print, smooth, that requires use of a hose clamp. If you want to print something with threads that won't require using a clamp, but would take longer to print, you could go for something like this (not my design): https://www.thingiverse.com/thing:4061125
Also note: If you are wanting to splice 4" flex hose to 4" flex hose, I also have a printable “1-to-1 mimic" of the POWERTEC 70123 available here: https://www.printables.com/model/1077997-dust-splice-coupler-adapter-from-4-flex-hose-to-4
*Amazon link is an affiliate link