40mm Vacuum hose splicer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would…
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 45
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would do and that's design up a solution. It's a tight fit, but hey, that's what you want. The OD of this splitter w/out the torrid ridges is 40mm. The added ridges help to hold it in place and create a better seal.
Picture is of the vacuum hose.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Sunlu PLA Doesn't matter
Notes:
Any material does the trick.
Category: Tools