40mm Vacuum hose splicer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I had to cut some of my vacuum hose back and that left two unusable hoses. So I did what anyone in my position would do and that's design up a solution. It's a tight fit, but hey, that's what you want. The OD of this splitter w/out the torrid ridges is 40mm. The added ridges help to hold it in place and create a better seal.
Picture is of the vacuum hose.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: Sunlu PLA Doesn't matter
Notes:
Any material does the trick.
Category: Tools