1 / 4
🐛Loong Millipede: Print in place, articulated, support free, multiple lengths, optimized. — image 1
1 / 4

🐛Loong Millipede: Print in place, articulated, support free, multiple lengths, optimized.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.55 – €1.90 net (excluding VAT)

For file: millipede-thin-26vertebras_0.2mm_PLA_MK3S_2h17m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.72 excluding VAT (range midpoint).

Weight reported by the author
10 g
Print time reported by the author
2.28 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Articulated millipede toy, remixed original with multiple lengths + optimized legs size for better adhesion.

Rating
4.9 / 5
Likes
174
Downloads
1,211
Makes
13
Views
3,652
Reviews
10

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

➡️ Check out also mega long millipede

 

Info:

  • for those who likes it long
  • in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17 fragments aka vertebras)
    • so here I am posting variations with more vertebras/fragments - until maximum of the plate size for MINI / MK3s+
    • other sizes can be easily achieved by Blender modification
  • OPTIMIZED:
    • i have increased the bottom size of the feet
      • → more area sticking to plate → bigger adhesion to surface
      • other dimensions are the same as in original for the 98mm centipede (the smaller centipede)
  • so I have cut it in Blender into 3 parts (head, vertebra sample and rear)
    • for vertebra is defined array modifier
    • with that it is just about to insert number of vertebras and head is moved automatically based on formula → easy to create any length of centipede
      • locate object “thin-vertebra-array-SET-COUNT” find “array modifier”, edit “count" value for anything you like
      • export STL model

 

Max lengths info:

  • 48 vertebras
    • this is max length then can fit Prusa MINI diagonal
    • it is also max length for Prusa MK3S for X axis
  • 63 vertebras
    • this is max length then can fit Prusa MK3S diagonal

 

Print instructions:

  • no supports needed
  • I suggest use brim, if you have problems with adhesion
    • 0.4mm distance from object (so it is easily removed!) is enough
    • reason: it is quite risk without brim for such long millepede, too many feet :) 
    • all attached 3mf and gcode files contain brim
    • with brim, you can quite safely increase speed of the print
  • for print without brim:
    • i have optimized the model, so it has now feet adjacent to plate surface bigger, so it has more adhesion now
    • but still ensure your plate is super clean!
    • possibly use 3d printing glue
      • I was using glue while printing mine long centipede, because you can have only 1 spot not super clean (it happened to me.. 😬), and it will cause one 1 leg slip off, and the whole print is useless… 
    • check the print frequently for first layers until both feet from one pair are joined via bridge, after that point the print is safer
    • other tip is to reduce some speeds of a printer (not to shake the model too much)

Tags