1 / 4
🐛Loong Millipede: Print in place, articulated, support free, multiple lengths, optimized.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Articulated millipede toy, remixed original with multiple lengths + optimized legs size for better adhesion.
- Ocena
- 4,9 / 5
- Polubienia
- 174
- Pobrania
- 1210
- Wydruki
- 13
- Wyświetlenia
- 3648
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 13) (Komentarze: 15)Remiksy (1)Kolekcje (214)Powiązane
➡️ Check out also mega long millipede
Info:
- for those who likes it long
- in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17 fragments aka vertebras)
- so here I am posting variations with more vertebras/fragments - until maximum of the plate size for MINI / MK3s+
- other sizes can be easily achieved by Blender modification
- OPTIMIZED:
- i have increased the bottom size of the feet
- → more area sticking to plate → bigger adhesion to surface
- other dimensions are the same as in original for the 98mm centipede (the smaller centipede)
- i have increased the bottom size of the feet
- so I have cut it in Blender into 3 parts (head, vertebra sample and rear)
- for vertebra is defined array modifier
- with that it is just about to insert number of vertebras and head is moved automatically based on formula → easy to create any length of centipede
- locate object “thin-vertebra-array-SET-COUNT” find “array modifier”, edit “count" value for anything you like
- export STL model
Max lengths info:
- 48 vertebras
- this is max length then can fit Prusa MINI diagonal
- it is also max length for Prusa MK3S for X axis
- 63 vertebras
- this is max length then can fit Prusa MK3S diagonal
Print instructions:
- no supports needed
- I suggest use brim, if you have problems with adhesion
- 0.4mm distance from object (so it is easily removed!) is enough
- reason: it is quite risk without brim for such long millepede, too many feet :)
- all attached 3mf and gcode files contain brim
- with brim, you can quite safely increase speed of the print
- for print without brim:
- i have optimized the model, so it has now feet adjacent to plate surface bigger, so it has more adhesion now
- but still ensure your plate is super clean!
- possibly use 3d printing glue
- I was using glue while printing mine long centipede, because you can have only 1 spot not super clean (it happened to me.. 😬), and it will cause one 1 leg slip off, and the whole print is useless…
- check the print frequently for first layers until both feet from one pair are joined via bridge, after that point the print is safer
- other tip is to reduce some speeds of a printer (not to shake the model too much)