Eye of Sauron | Lord of the Rings Ring Holder (Print in Place & Support Free)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.74 – €0.90 net (excluding VAT)
For file: LOTRRingHolder_0.2mm_PLA_MK3S_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.82 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 52.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Lord of the Rings Eye of Sauron ring holder
- Rating
- 5 / 5
- Likes
- 346
- Downloads
- 1,221
- Makes
- 8
- Views
- 10,018
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is Version l of the ring holder, designed for the Prusa Ring Holder Contest. It features textured sides and can hold any size ring up to 5mm wide.
Please leave a like and follow to increase the reach of the project!
The ring pictured is size 6.5US and 3mm wide.
________________________
Print Suggestions!
- Use a layer height of 0.2mm or finer
- Use a 0.4mm or smaller nozzle due to thin walls
- Allow bed to cool completely before removal due to thin features
- No supports needed, prints in one piece
- If having bed adhesion problems, clean with alcohol or use glue stick
________________________
Let me know if you have trouble printing the textured sides and I will post one without it.
Please reach out if you are encountering any difficulty printing, I'm happy to help!
