Eye of Sauron | Lord of the Rings Ring Holder (Print in Place & Support Free)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
0,74 € – 0,90 € netto (bez VAT)
Dla pliku: LOTRRingHolder_0.2mm_PLA_MK3S_53m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 0,82 € netto (środek widełek).
- Masa podana przez autora
- 9 g
- Czas druku podany przez autora
- 52,8 min
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Lord of the Rings Eye of Sauron ring holder
- Ocena
- 5 / 5
- Polubienia
- 346
- Pobrania
- 1221
- Wydruki
- 8
- Wyświetlenia
- 10 018
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is Version l of the ring holder, designed for the Prusa Ring Holder Contest. It features textured sides and can hold any size ring up to 5mm wide.
Please leave a like and follow to increase the reach of the project!
The ring pictured is size 6.5US and 3mm wide.
________________________
Print Suggestions!
- Use a layer height of 0.2mm or finer
- Use a 0.4mm or smaller nozzle due to thin walls
- Allow bed to cool completely before removal due to thin features
- No supports needed, prints in one piece
- If having bed adhesion problems, clean with alcohol or use glue stick
________________________
Let me know if you have trouble printing the textured sides and I will post one without it.
Please reach out if you are encountering any difficulty printing, I'm happy to help!
