Print-in-Place Simple Hinge (no supports needed)
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.63 – €0.77 net (excluding VAT)
For file: 2x-print-in-place hinge v11_0.2mm_PLA_MK3S_47m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.70 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 46.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple hinge with 3 holes on each plate that prints in place requiring no assembly
- Rating
- 5 / 5
- Likes
- 762
- Downloads
- 2,797
- Makes
- 13
- Views
- 8,722
- Reviews
- 11
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
I need hinges for the Laser Cut Stackable 3D Filament Holder I am designing. I had a set of small metal hinges that I used for the prototype, but no idea where or when I bought the originals so I designed these hinges in Fusion 360.
The model is made up of two parts that print in a single STL file and work right off the print bed. No supports are needed.
Two versions are available depending on the fasteners you will use:
- print-in-place hinge v11 - for flat bottomed screws or bolts
- print-in-place hinge v11 countersink - for wood screws expecting a counter sunk hole
Both #6 and #8 screws fit, the length depends on what you are attaching them to. For my filament holder made of 1/8" board, I'm using #6-½" with washers and nuts.