Print-in-Place Simple Hinge (no supports needed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hinge with 3 holes on each plate that prints in place requiring no assembly
- Ocena
- 5 / 5
- Polubienia
- 762
- Pobrania
- 2788
- Wydruki
- 13
- Wyświetlenia
- 8697
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I need hinges for the Laser Cut Stackable 3D Filament Holder I am designing. I had a set of small metal hinges that I used for the prototype, but no idea where or when I bought the originals so I designed these hinges in Fusion 360.
The model is made up of two parts that print in a single STL file and work right off the print bed. No supports are needed.
Two versions are available depending on the fasteners you will use:
- print-in-place hinge v11 - for flat bottomed screws or bolts
- print-in-place hinge v11 countersink - for wood screws expecting a counter sunk hole
Both #6 and #8 screws fit, the length depends on what you are attaching them to. For my filament holder made of 1/8" board, I'm using #6-½" with washers and nuts.