1 / 7
USS Enterprise 1701-F Print in Place Glider — image 1
1 / 7

USS Enterprise 1701-F Print in Place Glider

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ultralight glider in the shape of a Star Trek ship like the Odyssey class USS Enterprise 1701-F.

Rating
4.857 / 5
Likes
194
Downloads
1,098
Makes
10
Views
14,316
Reviews
7

Updated at source:

Model information

Category
Vehicles
License
Creative Commons — Attribution — Noncommercial — Share Alike

Ultralight Glider - Start Trek (Star Trek Online STO) Odyssey Class USS Enterprise 1701-F.

Print at 0.2mm layer height.  Carefully remove from build plate (use scraper from front and slowly work your way down through the nacelles).  

 

If you are printing with the Classic Perimeter Generator, be sure to enable thin-wall detection.  Also, PETG may be too flexible for this model to fly well (most PLAs seem to work well). 

 

 

 

 

Hook a rubber band up through the front bumper:

 

It should fly pretty straight straight off the build plate, but if you need some lift bend the rear hull up a little to act as an elevator/flap:

 

Special thanks to @becki05_321509 for designing a launcher to make rubber band launching easier - find the great model here:

https://www.printables.com/de/model/501691-slingshot-for-airplanes

 

Versions:

v4 Apr 27 2023: minor cosmetic changes.  

v3 Apr 26 2023: more additions to front structures to help withstand impacts.  

v2 Apr 25 2023: Increased mass on front supports to help withstand impacts and shift weight balance slightly forward.  

v1 Apr 23 2023: First production version, print in place and fly.  Front supports are very fragile. 

 

 

Tags